PicoScope® 6000E Series

Mask limit testing

Mask limit testing allows you to compare live signals against known good signals, and is designed for production and debugging environments. Simply capture a known good

signal, draw (or have PicoScope auto-generate) a mask and then measure the system under test. PicoScope will check for mask violations and perform pass/fail testing, capture

intermittent glitches, and can show a failure count and other statistics in the Measurements window. Masks can be saved in a library for future use, and exported/imported to share

with other PicoScope users.

Waveform buffer and navigator

Ever spotted a glitch on a waveform, but

by the time you’ve stopped the scope it

has gone? With PicoScope you don’t need

to worry about missing glitches or other

transient events. PicoScope can store the

last ten thousand oscilloscope or spectrum

waveforms in its circular waveform buffer.

The buffer navigator provides an efficient

way of navigating and searching through

waveforms, effectively letting you turn

back time. Tools such as mask limit testing

can also be used to scan through each

waveform in the buffer looking for mask

violations.