| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
TEA2016AAT/2 bảng dữ liệu(PDF) 26 Page - NXP Semiconductors |
|
|
|||||||||||||||||||||||||||||
TEA2016AAT/2 bảng dữ liệu(HTML) 26 Page - NXP Semiconductors |
|
26 / 59 page ![]() NXP Semiconductors TEA2016AAT/2 Digital controller for high-efficiency resonant power supply Protection Description Action PFC LLC Protection register LLC protections UVP SUPHS undervoltage protection SUPHS pin GATEHS = off - off - UVP SNSBOOST undervoltage protection boost restart when VSNSBOOST > Vstart(SNSBOOST) - off - OVP SUPIC output overvoltage protection; measured via the SUPIC pin LLC and PFC are either latched or safe restart off off Y CMR capacitive mode regulation system ensures that mode of operation is inductive - - Y OCP overcurrent protection switch off cycle-by-cycle; After several consecutive cycles, LLC and PFC are either latched or safe restart off off Y STARTUP MAX maximum start-up time LLC and PFC are either latched or safe restart off off Y OPP overpower protection LLC and PFC are either latched or safe restart off off Y Table 4. Protections overview...continued [1] Selectable via a parameter at the MTP. When the system is in a latched or safe restart protection, the SUPIC voltage is regulated to its start level via the DRAINPFC pin. 8.6.1 Undervoltage protection SUPIC When the voltage on the SUPIC pin is below its undervoltage level Vuvp(SUPIC), both the PFC and LLC converter stop switching. The capacitors at the SUPIC pin are recharged via the DRAINPFC pin. When the SUPIC supply voltage exceeds its start level, the system restarts. 8.6.2 MTP fail When, at start-up, the SUPIC reaches the start level, the system reads the parameters from the internal MTP. If reading the MTP failed, the system retries reading the MTP until it succeeds. During this time, the PFC and LLC remain off. The SUPIC is regulated to the Vstart(SUPIC) level. 8.6.3 Internal overtemperature protection (OTP) An accurate internal temperature protection is provided in the circuit. When the junction temperature exceeds the thermal shutdown temperature, the PFC and the LLC stop switching. The response of the internal OTP follows the setting of the external OTP. It can be either latched or safe restart. TEA2016AAT_2 All information provided in this document is subject to legal disclaimers. © 2023 NXP B.V. All rights reserved. Product data sheet Rev. 1 — 15 February 2023 26 / 59 |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |