AD7142 datasheet(7/68 Pages) AD

7 / 68 page

AD7142

Rev. 0 | Page 7 of 68

ABSOLUTE MAXIMUM RATINGS

Table 6.

Parameter

Rating

AVCC to AGND, DVCC to DGND

−0.3 V to +3.6 V

Analog Input Voltage to AGND

−0.3 V to AVCC + 0.3 V

Digital Input Voltage to DGND

−0.3 V to VDRIVE + 0.3 V

Digital Output Voltage to DGND

−0.3 V to VDRIVE + 0.3 V

Input Current to Any Pin Except

Supplies1

10 mA

ESD Rating (Human Body Model)

2.5 kV

Operating Temperature Range

−40°C to +150°C

Storage Temperature Range

−65°C to +150°C

Junction Temperature

150°C

LFCSP_VQ

Power Dissipation

450 mW

θJA Thermal Impedance

135.7°C/W

IR Reflow Peak Temperature

260°C (±0.5°C)

Lead Temperature (Soldering 10 sec)

300°C

1 Transient currents of up to 100 mA do not cause SCR latch-up.

Stresses above those listed under Absolute Maximum Ratings

may cause permanent damage to the device. This is a stress

rating only; functional operation of the device at these or any

other conditions above those indicated in the operational

section of this specification is not implied. Exposure to absolute

maximum rating conditions for extended periods may affect

device reliability.

ESD CAUTION

ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on

the human body and test equipment and can discharge without detection. Although this product features

proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy

electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance

degradation or loss of functionality.

AD7142 bảng dữ liệu(PDF) 7 Page - Analog Devices

AD7142 bảng dữ liệu(HTML) 7 Page - Analog Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68

bảng dữ liệu tải về

Link URL