DSP56307

MOTOROLA

DSP56307EVM Product Brief

5

–

Provides extensive error checking and reporting

•

Domain Technologies debug software with Windows™-based user interface

–

Symbolic debugging

–

Windows for data, code, DSP registers, commands, peripherals, etc.

–

Data and registers displayed in fractional, decimal, or hexadecimal format

–

Graphical display of memory segments

–

Up to eight simultaneous software breakpoints

–

Built–in–line assembler and disassembler

User Requirements

The user must provide the following:

•

Power supply (7–9 V ac or dc, 500 mA with 2.1 mm coaxial connector)

•

RS-232 cable (DB9 plug to DB9 receptacle)

•

Audio source and a cable with 1/8-inch stereo plugs

•

IBM PC-compatible computer (486 class or higher) running Windows 3.1 (or higher) with an RS-

232 serial port capable of 9,600 to 115,200 bits-per-second operation, 8 Mbytes RAM, 3-1/2 inch

diskette drive, CD-ROM drive, hard drive with 20 Mbytes of free disk space, and a mouse

SUPPORTING DOCUMENTATION

The first three documents listed in Table 1 are required for a complete description of the

DSP56307 chip and are necessary to design properly with the part. The fourth and fifth

documents describe the DSP56307 Evaluation Module, including installation and use and are

provided with the module. Additional copies are available from one of the following locations

(see back cover for detailed information):

•

A local Motorola distributor

•

A Motorola Semiconductor Sales Office

•

Motorola Literature Distribution Center

•

The World Wide Web (WWW) http://www.mot.com/SPS/DSP/documentation.

Freescale Semiconductor, Inc.

For More Information On This Product,

Go to: www.freescale.com