 |
công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
|
công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
RA4E2 bảng dữ liệu(PDF) 30 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
RA4E2 bảng dữ liệu(HTML) 30 Page - Renesas Technology Corp |
|
|
30 / 90 page  2.3.2 Clock Timing Table 2.17 Clock timing except for sub-clock oscillator Parameter Symbol Min Typ Max Unit Test conditions EXTAL external clock input cycle time tEXcyc 41.66 — — ns Figure 2.7 EXTAL external clock input high pulse width tEXH 15.83 — — ns EXTAL external clock input low pulse width tEXL 15.83 — — ns EXTAL external clock rise time tEXr — — 5.0 ns EXTAL external clock fall time tEXf — — 5.0 ns Main clock oscillator frequency fMAIN 8 — 24 MHz — Main clock oscillation stabilization wait time (crystal)*1 tMAINOSCWT — — —*1 ms Figure 2.8 LOCO clock oscillation frequency fLOCO 29.4912 32.768 36.0448 kHz — LOCO clock oscillation stabilization wait time tLOCOWT — — 60.4 µs Figure 2.9 ILOCO clock oscillation frequency fILOCO 13.5 15 16.5 kHz — MOCO clock oscillation frequency FMOCO 6.8 8 9.2 MHz — MOCO clock oscillation stabilization wait time tMOCOWT — — 15.0 µs — HOCO clock oscillator oscillation frequency Without FLL fHOCO16 15.78 16 16.22 MHz –20 ≤ Ta ≤ 105°C fHOCO18 17.75 18 18.25 fHOCO20 19.72 20 20.28 fHOCO16 15.71 16 16.29 –40 ≤ Ta ≤ –20°C fHOCO18 17.68 18 18.32 fHOCO20 19.64 20 20.36 With FLL fHOCO16 15.960 16 16.040 –40 ≤ Ta ≤ 105°C Sub-clock frequency accuracy is ±50 ppm. fHOCO18 17.955 18 18.045 fHOCO20 19.950 20 20.050 HOCO clock oscillation stabilization wait time*2 tHOCOWT — — 64.7 µs — HOCO period jitter — — ±85 — ps — FLL stabilization wait time tFLLWT — — 1.8 ms — PLL clock frequency fPLL 100 — 240 MHz — PLL clock oscillation stabilization wait time tPLLWT — — 174.9 µs Figure 2.10 PLL period jitter fPLL ≥ 120MHz — — ±100 — ps — fPLL < 120MHz — — ±120 — ps — PLL long term jitter — — ±300 — ps Term: 1µs, 10µs Note 1. When setting up the main clock oscillator, ask the oscillator manufacturer for an oscillation evaluation, and use the results as the recommended oscillation stabilization time. Set the MOSCWTCR register to a value equal to or greater than the recommended value. After changing the setting in the MOSCCR.MOSTP bit to start main clock operation, read the OSCSF.MOSCSF flag to confirm that it is 1, and then start using the main clock oscillator. Note 2. This is the time from release from reset state until the HOCO oscillation frequency (fHOCO) reaches the range for guaranteed operation. Table 2.18 Clock timing for the sub-clock oscillator Parameter Symbol Min Typ Max Unit Test conditions Sub-clock frequency fSUB — 32.768 — kHz — Sub-clock oscillation stabilization wait time tSUBOSCWT — — —*1 s Figure 2.11 RA4E2 Datasheet 2. Electrical Characteristics R01DS0413EJ0110 Rev.1.10 Feb 28, 2023 Page 30 of 90 |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Vietnamese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
