CD4029BMS

FN3304 Rev 0.00

Page 5 of 11

December 1992

Minimum Preset Enable

Pulse Width

TW

VDD = 5V

1, 2, 3

+25oC

-

130

ns

VDD = 10V

1, 2, 3

+25oC

-

70

ns

VDD = 15V

1, 2, 3

+25oC

-

50

ns

Input Capacitance

CIN

Any Input

1, 2

+25oC-

7.5

pF

NOTES:

1. All voltages referenced to device GND.

2. The parameters listed on Table 3 are controlled via design or process and are not directly tested. These parameters are characterized on

initial design release and upon design changes which would affect these characteristics.

3. CL = 50pF, RL = 200K, Input TR, TF < 20ns.

4. From Up/Down, Binary/Decode, Carry In, or Preset Enable Control Inputs to Clock Edge.

5. If more than one unit is cascaded in the parallel clocked application, tr CL should be made

 the sum of the fixed propagation delay at

15pF and the transition time of the carry output driving stage for the estimated capacitive load. This measurement was made with a de-

coupling capacitor (>1

F) between VDD and VSS.

6. From Carry In to Clock Edge.

TABLE 4. POST IRRADIATION ELECTRICAL PERFORMANCE CHARACTERISTICS

PARAMETER

SYMBOL

CONDITIONS

NOTES

TEMPERATURE

LIMITS

UNITS

MIN

MAX

Supply Current

IDD

VDD = 20V, VIN = VDD or GND

1, 4

+25oC-

25

A

N Threshold Voltage

VNTH

VDD = 10V, ISS = -10

A

1, 4

+25oC

-2.8

-0.2

V

N Threshold Voltage

Delta

VTN

VDD = 10V, ISS = -10

A

1, 4

+25oC-

1V

P Threshold Voltage

VTP

VSS = 0V, IDD = 10

A

1, 4

+25oC0.2

2.8

V

P Threshold Voltage

Delta

VTP

VSS = 0V, IDD = 10

A

1, 4

+25oC-

1V

Functional

F

VDD = 18V, VIN = VDD or GND

1

+25oCVOH >

VDD/2

VOL <

VDD/2

V

VDD = 3V, VIN = VDD or GND

Propagation Delay Time

TPHL

TPLH

VDD = 5V

1, 2, 3, 4

+25oC

-

1.35 x

+25oC

Limit

ns

NOTES: 1. All voltages referenced to device GND.

2. CL = 50pF, RL = 200K, Input TR, TF < 20ns

3. See Table 2 for +25oC limit.

4. Read and Record

TABLE 5. BURN-IN AND LIFE TEST DELTA PARAMETERS +25OC

PARAMETER

SYMBOL

DELTA LIMIT

Supply Current - MSI-2

IDD

 1.0A

Output Current (Sink)

IOL5

 20% x Pre-Test Reading

Output Current (Source)

IOH5A

 20% x Pre-Test Reading

TABLE 6. APPLICABLE SUBGROUPS

CONFORMANCE GROUP

MIL-STD-883

METHOD

GROUP A SUBGROUPS

READ AND RECORD

Initial Test (Pre Burn-In)

100% 5004

1, 7, 9

IDD, IOL5, IOH5A

Interim Test 1 (Post Burn-In)

100% 5004

1, 7, 9

IDD, IOL5, IOH5A

TABLE 3. ELECTRICAL PERFORMANCE CHARACTERISTICS

(Continued)

PARAMETER

SYMBOL

CONDITIONS

NOTES

TEMPERATURE

LIMITS

UNITS

MIN

MAX