| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
STM32U5A5QJ bảng dữ liệu(PDF) 29 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STM32U5A5QJ bảng dữ liệu(HTML) 29 Page - STMicroelectronics |
|
29 / 382 page ![]() DS13543 Rev 1 29/382 STM32U5Axxx Functional overview 99 further access to this area until next system reset. One area per bank can be selected at the beginning of the secure area. • volatile block-based secure flash memory area Each page can be programmed on-the-fly as secure or nonsecure. 3.4.3 FLASH privilege protection Each flash memory page can be programmed on the fly as privileged or unprivileged. 3.5 Embedded SRAMs Six SRAMs are embedded in the STM32U5Axxx devices, each with specific features. SRAM1, SRAM2, SRAM3 and SRAM5 are the main SRAMs. SRAM4 is in the SRAM used for peripherals LPBAM (low-power background autonomous mode) in Stop 2 mode. These SRAMs are made of several blocks that can be powered down in Stop mode to reduce consumption: • SRAM1: 12 64-Kbyte blocks (total 768 Kbytes) • SRAM2: 8-Kbyte + 56-Kbyte blocks (total 64 Kbytes) with optional ECC. In addition SRAM2 blocks can be retained in Standby mode. • SRAM3: 13 64-Kbyte blocks (total 832 Kbytes) with optional ECC. When ECC is enabled, 256 Kbytes support ECC and 512 Kbytes of SRAM3 can be accessed without ECC. • SRAM4: 16 Kbytes • SRAM5: 13 64-Kbyte blocks (total 832 Kbytes) • BKPSRAM (backup SRAM): 2 Kbytes with optional ECC. The BKPSRAM can be retained in all low-power modes and when VDD is off in VBAT mode, but not in Shutdown mode. 3.5.1 SRAMs TrustZone security When the TrustZone security is enabled, all SRAMs are secure after reset. The SRAM1, SRAM2, SRAM3, SRAM4 and SRAM5 can be programmed as secure or nonsecure by blocks, using the MPCBB (block-based memory protection controller). The granularity of SRAM secure block based is a page of 512 bytes. Backup SRAM regions can be programmed as secure or nonsecure with watermark, using the TZSC (TrustZone security controller) in the GTZC (global TrustZone controller). 3.5.2 SRAMs privilege protection The SRAM1, SRAM2, SRAM3, SRAM4 and SRAM5 can be programmed as privileged or unprivileged by blocks, using the MPCBB. The granularity of SRAM privilege block based is a page of 512 bytes. Backup SRAM regions can be programmed as privileged or unprivileged with watermark, using the TZSC (TrustZone security controller) in the GTZC (global TrustZone controller). |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |