PicoScope 2000 Series oscilloscopes

PicoLog® 6 support

All PicoScope 2000 Series oscilloscopes are now supported in PicoLog 6, allowing you

to view and record signals on multiple units in one capture.

PicoLog 6 allows sample rates of up to 1 kS/s per channel, and is ideal for long-term

observation of general parameters, such as voltage or current levels, on several channels

at the same time. It is less suitable for waveshape or harmonic analysis: use the

PicoScope 6 software for these tasks.

You can also use PicoLog 6 to view data from your oscilloscope alongside a data

logger or other device. For example, you could measure voltage and current with your

PicoScope and plot both against temperature using a TC-08 thermocouple data logger.

PicoLog 6 is available for Windows, macOS and Linux, including Raspberry Pi OS..

PicoSDK® – write your own apps

Our software development kit, PicoSDK, allows you to write your own software and

includes drivers for Windows, macOS and Linux. Example code supplied on our GitHub

organization page shows how to interface to third-party software packages such as

National Instruments LabVIEW and MathWorks MATLAB.

Amongst other features, the drivers support data streaming, a mode that captures

continuous gap-free data directly to your PC at rates of up to 125 MS/s, so you are not

limited by the size of your scope’s capture memory. Sampling rates in streaming mode

are subject to PC specifications and application loading.

There is also an active community of

PicoScope 6 users who share both

code and whole applications on our

Test and Measurement Forum and the

PicoApps section of the website. The

Frequency Response Analyzer shown

here is one of the most popular of these

applications.