MIP SERIES HEAVY DUTY, MEDIA-ISOLATED PRESSURE TRANSDUCERS

MIP Series Heavy Duty, Media-Isolated Pressure Transducers Datasheet | sps.honeywell.com/ast |

3

FIGURE 1. NOMENCLATURE AND ORDER GUIDE

MIP A N1 X X 010B S AA X1

Electrical Connector Type

Special

Output Transfer Function

Media Isolated Pressure

MIP

A

1

Contact Honeywell Sales for custom configurations.

2

See Table 4 for cable material specifications.

3

Other external seal materials are available for G1, G2, and M1 Pressure port types.

4

Sealed gage option only available in pressure ranges at or above 8 bar | 100 psi.

Pressure Range

bar

015P

030P

050P

060P

100P

150P

200P

250P

300P

001B

002B

004B

006B

008B

010B

012B

016B

1 bar

2 bar

4 bar

6 bar

8 bar

10 bar

12 bar

16 bar

15 psi

30 psi

50 psi

60 psi

100 psi

150 psi

200 psi

250 psi

300 psi

X

Series

AA

020B

025B

035B

040B

046B

050B

055B

060B

20 bar

25 bar

35 bar

40 bar

46 bar

50 bar

55 bar

60 bar

500P

600P

667P

700P

750P

800P

850P

870P

500 psi

600 psi

667 psi

700 psi

750 psi

800 psi

850 psi

870 psi

psi

F1

7/16-20 UNF

1/4 inch 45° Flare

Female Schrader

(SAE J512)

N1

N2

1/4-18 NPT

(ANSI/ASME B1.20.1)

1/8-27 NPT

(ANSI/ASME B1.20.1)

M12 x 1.53

(ISO 6149-3)

G1/4 A-G3

(ISO 1179-3)

M1

G1

Pressure Port Type

G1/4 A-L3

(ISO 1179-2)

G2

Metri-Pack 150,

Standard (UL V-0)

For example,

MIPAN1XX010BSAAX defines an MIP Series Heavy Duty, Media Isolated Pressure Transducer,

Metri-Pack 150, standard (UL V-0) electrical connector type, 1/4-18 NPT pressure port type, 10 bar pressure

range, sealed gage pressure reference, ratiometric: 5 Vs, 10% to 90% Vs output transfer function

A Absolute

S Sealed gage4

Special

X

X

Pressure Reference

Ratiometric: 5.0 Vs, 10% to 90% Vs

K Cable harness

2

,

0.5 m [1.3 ft] cable length

E Cable harness

2

,

1.0 m [3.2 ft] cable length

F

Cable harness2,

2,0 m [6.6 ft] cable length

G Cable harness for CH output transfer

function2, 3,0 m [9.8 ft] cable length

H Cable harness for CH output transfer

function2, 5,0 m [16.4 ft] cable length

CH Current: 4 mA to 20 mA

CAUTION

PRODUCT DAMAGE DUE TO MISUSE

• Ensure torque specifications are determined for the specific application. Values provided are for reference only. (Mating

materials and thread sealants can result in significantly different torque values from one application to the next.)

• Use appropriate tools (such as an open-ended wrench or deep well socket) to install transducers.

• Ensure that the proper mating electrical connector with a seal is used to connect the transducer. Improper or damaged seals

can compromise ingress protection, leading to short circuits.

• Ensure that filters are used upstream of the transducers to keep media flow free of particulates. MIP Series transducers are

dead-end devices. Particulate accumulation may clog the port or damage the diaphragm.

• Ensure that the transducer is mounted in a vertical position with the process connection (pressure port) downward to avoid

particular deposits.

• Ensure that the media does not create a residue when dried. Build-up of residue inside the transducer may affect transducer

output.

• Ensure that the transducer housing is properly grounded.

• For cable harness versions, ensure that the cable bend radius is maintained at a minimum of 38 mm [1.50 in] in the end

application assembly.

Failure to comply with these instructions may result in product damage.