6 Specifications

6.1 Absolute Maximum Ratings for LM2901B-Q1

over operating free-air temperature range (unless otherwise noted)(1)

MIN

MAX

UNIT

Supply voltage: VS = (V+) – (V–)

-0.3

38

V

Differential input voltage : VID (2)

±38

V

Input pins (IN+, IN–)

-0.3

38

V

Current into input pins (IN+, IN–)

-50

mA

Output pin (OUT)

-0.3

38

V

Output sink current

25

mA

Output short-circuit duration(3)

Unlimited

s

Junction temperature, TJ

TBD

150

°C

Storage temperature, Tstg

-65

150

°C

(1)

Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress

ratings only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under

Recommended Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device

reliability.

(2)

Differential voltages are at IN+ with respect to IN-

(3)

Short circuits from outputs to V+ can cause excessive heating and eventual destruction.

6.2 Absolute Maximum Ratings for LM2901x-Q1

over operating free-air temperature range (unless otherwise noted)(1)

MIN

MAX

UNIT

Supply voltage, VCC (2)

36

V

Differential input voltage, VID (3)

±36

Input voltage range, VI (either input)

–0.3

36

Output voltage, VO

36

Output current, IO

20

mA

Duration of output short circuit to ground(4)

Unlimited

Operating virtual junction temperature, TJ

150

°C

Storage temperature, Tstg

–65

150

°C

(1)

Operation outside the Absolute Maximum Ratings may cause permanent device damage. Absolute Maximum Ratings do not imply

functional operation of the device at these or any other conditions beyond those listed under Recommended Operating Conditions.

If used outside the Recommended Operating Conditions but within the Absolute Maximum Ratings, the device may not be fully

functional, and this may affect device reliability, functionality, performance, and shorten the device lifetime.

(2)

All voltage values, except differential voltages, are with respect to network ground.

(3)

Differential voltages are at IN+ with respect to IN−.

(4)

Short circuits from outputs to VCC can cause excessive heating and eventual destruction.

www.ti.com

LM2901-Q1, LM2901V-Q1, LM2901AV-Q1, LM2901B-Q1

SLCS142G – DECEMBER 2003 – REVISED MARCH 2023

Copyright © 2023 Texas Instruments Incorporated

Submit Document Feedback

5

Product Folder Links: LM2901-Q1 LM2901V-Q1 LM2901AV-Q1 LM2901B-Q1