| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
PIC16F15213T-I/ST bảng dữ liệu(PDF) 321 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
PIC16F15213T-I/ST bảng dữ liệu(HTML) 321 Page - Microchip Technology |
|
321 / 439 page ![]() ...........continued ADC Clock Source CS[2:0] ADC Clock Period (TAD) for Different Device Frequencies (FOSC) 32 MHz 20 MHz 16 MHz 8 MHz 4 MHz 1 MHz FOSC/8 ‘b001 250 ns(2) 400 ns(2) 500 ns 1.0 µs 2.0 µs 8.0 µs FOSC/16 ‘b101 500 ns 800 ns 1.0 µs 2.0 µs 4.0 µs 16.0 µs(2) FOSC/32 ‘b010 1.0 µs 1.6 µs 2.0 µs 4.0 µs 8.0 µs 32.0 µs(2) FOSC/64 ‘b110 2.0 µs 3.2 µs 4.0 µs 8.0 µs 16.0 µs(2) 64.0 µs(2) ADCRC ‘bx11 1.0 - 6.0(1,3) Notes: 1. Refer to the “Electrical Specifications” section to see the TAD parameter for the ADCRC source typical TAD value. 2. These values violate the required TAD time. 3. The ADC clock period (TAD) and the total ADC conversion time can be minimized when the ADC clock is derived from the system clock FOSC. However, the ADCRC oscillator source must be used when conversions are to be performed with the device in Sleep mode. Figure 27-2. 10-Bit Analog-to-Digital Conversion TAD Cycles Set GO bit Conversion Starts Holding capacitor disconnected from analog input (THCD) On the following cycle: ADRESH:ADRESL is loaded, GO bit is cleared, ADIF bit is set, holding capacitor is reconnected to analog input. Enable ADC (ON bit) and select channel (CS bits) THCD TACQ TAD1TAD2TAD3TAD4TAD5TAD6TAD7 TAD8TAD9TAD10 TAD11 b9 b8 b7 b6 b5 b4 b3 b2 b1 b0 1 – 1.5TAD 27.1.5 Interrupts The ADC module allows for the ability to generate an interrupt upon completion of an analog-to-digital conversion. The ADC Interrupt Flag (ADIF) bit is set upon the completion of each conversion. If the ADC Interrupt Enable (ADIE) bit is set, an ADC interrupt event occurs. The ADIF bit must be cleared by software. Important: 1. The ADIF bit is set at the completion of every conversion, regardless of whether or not the ADC Interrupt is enabled. 2. The ADC operates in Sleep only when the ADCRC oscillator is selected as the clock source. The ADC Interrupt can be generated while the device is operating or while in Sleep. While the device is operating in Sleep mode: PIC16F15213/14/23/24/43/44 ADC - Analog-to-Digital Converter © 2020-2022 Microchip Technology Inc. and its subsidiaries Data Sheet DS40002195E-page 321 |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |