| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
PIC16F15213T-I/ST bảng dữ liệu(PDF) 325 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
PIC16F15213T-I/ST bảng dữ liệu(HTML) 325 Page - Microchip Technology |
|
325 / 439 page ![]() } } 27.3 ADC Acquisition Requirements For the ADC to meet its specified accuracy, the charge holding capacitor (CHOLD) must be allowed to fully charge to the input channel voltage level. The analog input model is shown in Figure 27-4. The source impedance (RS) and the internal sampling switch (RSS) impedance directly affect the time required to charge the capacitor CHOLD. The sampling switch (RSS) impedance varies over the device voltage (VDD). The maximum recommended impedance for analog sources is 10 kΩ. As the source impedance is decreased, the acquisition time may be decreased. After the analog input channel is selected (or changed), an ADC acquisition time must be completed before the conversion can be started. To calculate the minimum acquisition time, Equation 27-1 may be used. This equation assumes an error of 1/2 LSb. The 1/2 LSb error is the maximum error allowed for the ADC to meet its specified resolution. Equation 27-1. Acquisition Time Example Assumptions: Temperature = 50°C; External impedance = 10 kΩ; VDD = 5.0V TACQ = Amplifier Settling Time + Hold Capacitor Charging Time + Temperature Coefficient TACQ=TAMP+ TC+ TCOFF TACQ=2μs+TC+ Temperature−25°C 0.05μs/°C The value for TC can be approximated with the following equations: VAPPLIED 1− 12n+1 −1 =VCHOLD;[1]VCHOLDchargedtowithin½lsb VAPPLIED 1−e−TCRC =VCHOLD;[2]VCHOLDchargeresponsetoVAPPLIED VAPPLIED 1−e−TCRC =VAPPLIED 1− 12n+1 −1 ;Combining[1]and[2] Note: Where n = ADC resolution in bits Solving for TC: TC= −CHOLDRIC+RSS+RS ln 1/2047 TC= −10pF1kΩ+7kΩ+10kΩ ln 0.0004885 TC=1.37μs Therefore: TACQ=2μs+1.37μs+ 50°C−25°C 0.05μs/°C TACQ=4.62μs Important: • The reference voltage (VREF) has no effect on the equation, since it cancels itself out. • The charge holding capacitor (CHOLD) is not discharged after each conversion. • The maximum recommended impedance for analog sources is 10 kΩ. This is required to meet the pin leakage specification. PIC16F15213/14/23/24/43/44 ADC - Analog-to-Digital Converter © 2020-2022 Microchip Technology Inc. and its subsidiaries Data Sheet DS40002195E-page 325 |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |