công cụ tìm kiếm bảng dữ liệu linh kiện điện tử
  Vietnamese  ▼
ALLDATASHEET.VN

X  

LPC55S69JBD64 bảng dữ liệu(PDF) 40 Page - NXP Semiconductors

tên linh kiện LPC55S69JBD64
Giải thích chi tiết về linh kiện  32-bit Arm Cortex®-M33; M33 coprocessor, TrustZone, PowerQuad, CASPER, 320 KB SRAM; 640 KB flash, USB HS, Flexcomm Interface, SDIO, 32-bit counter/ timers, SCTimer/PWM, PLU, 16-bit 1.0 Msamples/sec ADC, Comparator,...
PDF  140 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
nhà sản xuất  NXP [NXP Semiconductors]
Trang chủ  http://www.nxp.com
Logo NXP - NXP Semiconductors

LPC55S69JBD64 bảng dữ liệu(HTML) 40 Page - NXP Semiconductors

Back Button LPC55S69JBD64 Datasheet HTML 36Page - NXP Semiconductors LPC55S69JBD64 Datasheet HTML 37Page - NXP Semiconductors LPC55S69JBD64 Datasheet HTML 38Page - NXP Semiconductors LPC55S69JBD64 Datasheet HTML 39Page - NXP Semiconductors LPC55S69JBD64 Datasheet HTML 40Page - NXP Semiconductors LPC55S69JBD64 Datasheet HTML 41Page - NXP Semiconductors LPC55S69JBD64 Datasheet HTML 42Page - NXP Semiconductors LPC55S69JBD64 Datasheet HTML 43Page - NXP Semiconductors LPC55S69JBD64 Datasheet HTML 44Page - NXP Semiconductors Next Button
Zoom Inzoom in Zoom Outzoom out
 40 / 140 page
background image
LPC55S6x
All information provided in this document is subject to legal disclaimers.
© NXP Semiconductors N.V. 2022. All rights reserved.
Product data sheet
Rev. 2.4 — 8 December 2022
40 of 138
NXP Semiconductors
LPC55S6x
32-bit ARM Cortex-M33 microcontroller
6.1.1 Termination of unused pins
Table 4 shows how to terminate pins that are
not used in the application. In many cases,
unused pins should be connected externally or configured correctly by software to
minimize the overall power consumption of the part.
Unused pins with GPIO function should be configured as outputs set to LOW with their
internal pull-up disabled. To configure a GPIO pin as output and drive it LOW, select the
GPIO function in the IOCON register, select output in the GPIO DIR register, and write a 0
to the GPIO PORT register for that pin. Disable the pull-up in the pin’s IOCON register.
In addition, it is recommended to configure all GPIO pins that are not bonded out on
smaller packages as outputs driven LOW with their internal pull-up disabled.
[1] I = Input, IA = Inactive (no pull-up/pull-down enabled), PU = Pull-Up enabled
Table 4.
Termination of unused pins
Pin
Default
state[1]
Recommended termination of unused pins
RESET
I; PU
The RESET pin can be left unconnected if the application does not use it.
all PIOn_m (not open-drain) I; PU
Can be left unconnected if driven LOW and configured as GPIO output with pull-up
or pull-down disabled by software.
PIOn_m (I2C open-drain)
IA
Can be left unconnected if driven LOW and configured as GPIO output by software.
XTAL32K_P
-
Connect to ground. When grounded, the RTC oscillator is disabled.
XTAL32K_N
-
Can be left unconnected.
XTAL32M_P
-
Connect to ground. When grounded, the System oscillator is disabled.
XTAL32M_N
-
Can be left unconnected.
VREFP
-
Tie to VBAT_DCDC.
VREFN
-
Tie to VSS.
VDDA
-
Tie to VBAT_DCDC.
VSSA
-
Tie to VSS.
USBn_DP
F
Can be left unconnected.
USBn_DM
F
Can be left unconnected.
USBn_3V3
F
Tie to VBAT_DCDC. If not using USB and using 1.8 V supply, USBn_3V3 can be
connected to 1.8 V. When not using USB, pin can be connected to ground as well.
USB1_VBUS
F
Can be left unconnected.
USBn_VSS
F
Tie to VSS.



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100  ...More


bảng dữ liệu tải về

Go To PDF Page


Link URL



Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không?  [ DONATE ] 

Alldatasheet là   |   Quảng cáo   |   Liên lạc với chúng tôi   |   Chính sách bảo mật   |   Liên kết đến bảng dữ liệu    |   Trao đổi link   |   Tìm kiếm theo nhà sản xuất
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com