STM32L010R8 datasheet(64/92 Pages) STMICROELECTRONICS

64 / 92 page

Electrical characteristics

STM32L010K8 STM32L010R8

64/92

DS12325 Rev 3

6.3.10

EMC characteristics

Susceptibility tests are performed on a sample basis during device characterization.

Functional EMS (electromagnetic susceptibility)

While a simple application is executed on the device (toggling 2 LEDs through I/O ports).

the device is stressed by two electromagnetic events until a failure occurs. The failure is

indicated by the LEDs:

•

Electrostatic discharge (ESD) (positive and negative) is applied to all device pins until

a functional disturbance occurs. This test is compliant with the IEC 61000-4-2 standard.

•

FTB: A Burst of Fast Transient voltage (positive and negative) is applied to VDD and

VSS through a 100 pF capacitor, until a functional disturbance occurs. This test is

compliant with the IEC 61000-4-4 standard.

A device reset allows normal operations to be resumed.

The test results are given in Table 43. They are based on the EMS levels and classes

defined in application note AN1709.

Table 42. Flash memory and data EEPROM endurance and retention

Symbol

Parameter

Conditions

Value

Unit

Min(1)

1. Guaranteed by characterization results, not tested in production.

NCYC(2)

Cycling (erase / write)

Program memory

TA = –40°C to 85 °C

kcycles

Cycling (erase / write)

EEPROM data memory

100

tRET(2)

2. Characterization is done according to JEDEC JESD22-A117.

Data retention (program memory) after

10 kcycles at TA = 85 °C

TRET = +85 °C

years

Data retention (EEPROM data memory)

after 100 kcycles at TA = 85 °C

Table 43. EMS characteristics

Symbol

Parameter

Conditions

Level/

Class

VFESD

Voltage limits to be applied on any I/O pin to induce

a functional disturbance

VDD = 3.3 V, TA = +25 °C,

fHCLK = 32 MHz

conforms to IEC 61000-4-2

VEFTB

Fast transient voltage burst limits to be applied

through 100 pF on VDD and VSS pins to induce a

functional disturbance

VDD = 3.3 V, TA = +25 °C,

fHCLK = 32 MHz

conforms to IEC 61000-4-4

STM32L010R8 bảng dữ liệu(PDF) 64 Page - STMicroelectronics

STM32L010R8 bảng dữ liệu(HTML) 64 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92

bảng dữ liệu tải về

Link URL