B8-22

CASE J

Materials

Header Case J1

Cold Rolled Steel/Nickel/Gold

Cases J2 - J5

Cold Rolled Steel/Nickel/Tin

Cover

Case J1

Kovar/Nickel

Case J2 - J5

Cold Rolled Steel/Nickel/Tin

Pins

#52 alloy (all cases)

Case J1

MHV Series Triple – compression glass seal

MTR Series Triple – ceramic seal

Cases J2 - J5

compression glass seal

Case dimensions in inches (mm)

Tolerance

±0.005 (0.13) for three decimal places

±0.01 (0.2) for two decimal places

unless otherwise specified

CASE J

BOTTOM VIEW

See Figures 36 - 40

for pin configuration

1.350 max

(34.29)

CAUTION

Heat from reflow or wave soldering may damage

the device. Solder pins individually with heat

application not exceeding 300

°C for 10 seconds

per pin.

Flange Thickness:

Cases J1 and J5

0.060 (1.52)

Case J2

0.073 (1.85) max

Cases J3 and J4

0.067 +0.005/-0.007 (1.70 +0.13/-0.8)

2.720 max

(69.09)

Dot on top of case indicates pin one

Note: Although every effort has been made to render the case drawings at actual size, variations in the printing process may cause some distortion. Please refer

to the numerical dimensions for accuracy.