Symbol

Dimensions in mm

Min.

Typ.

Max.

A

-

-

1.75

A1

0.10

-

0.25

A2

1.25

-

-

b

0.31

-

0.51

c

0.17

-

0.25

D(1)(2)

9.80

9.90

10.00

E

5.80

6.00

6.20

E1(2)(3)

3.80

3.90

4.00

e

-

1.27

-

h

0.25

-

0.50

L

0.40

-

1.27

k

0

-

8

ccc

-

-

0.10

1. Dimension "D" does not include mold flash, protrusions or gate burrs. Mold flash, protrusions or gate burrs shall not exceed

0.15 mm in total (both side).

2. Dimensions referred to the bottom side of the package.

3. Dimension "E1" does not include interlead flash or protrusions. Interlead flash, or protrusions or shall not exceed 0.25 mm

per side.

Parts marked as ES are not yet qualified and therefore not approved for use in production. ST is not responsible

for any consequences resulting from such use. In no event will ST be liable for the customer using any of these

engineering samples in production. ST’s Quality department must be contacted to run a qualification activity prior

to any decision to use these engineering samples.

L9963T

SO16N (10x4x1.25 mm) package information

DS13590 - Rev 4

page 39/45