 |
công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
|
công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
FDA803D bảng dữ liệu(PDF) 61 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
FDA803D bảng dữ liệu(HTML) 61 Page - STMicroelectronics |
|
|
61 / 78 page  DocID031487 Rev 2 61/78 FDA803D I2C bus interface 77 14.8 I2S, I2C and Enable relationship FDA803D provides both I2C and I2S communication by means of two different digital interfaces but connected to each other interfaces and clock domains. To program the I2C interface the I2S clock must be present, and at least 10 ms should have passed from the Enable pins setting event. In FDA803D the digital part has different clock domains: The I2C programming block clock is the I2C clock The I2S receiver clock which is the I2S clock The system clock which is generated by an internal PLL. The I2C commands are not effective if I2S clock is not present. However they will remain memorized inside I2C registers. If I2S clock is lost the digital machine goes in standby. I2S clock (SCK) should be given to device before enabling it (Enable pins set to ‘out of standby’). |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Vietnamese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
