10

H:\0 - Quality Documents\2 Department\Tech Serv\Application tooling\Presses\AP-K2N\TS010-00 AP-K2N Operation

Manual.doc

When using the MKS-L Applicator for SPC or

PSL splices

Step 1

Secure the fabricated steel guard (JST UK-17), to the

applicator using the cap head screws supplied.

Step 2

Secure the fabricated steel guard (JST UK-135), onto the

side face of the applicator using the cap head screws

supplied.

Step 3

Select the appropriate side guard (JST UK-3), and mount

onto the side guard support bracket (JST UK-9), using

the countersunk screws supplied..

Step 4

Remove the two upper motor fixing screws and clamp

the side guard support bracket onto the press utilizing

these screws.

Step 5

Adjust the side guard support bracket to achieve the best

relationship between guard and applicator.

Step 6

Tighten the screws and check that the guards are

correctly and securely fitted.