| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
SPC5643LFAMLL6 bảng dữ liệu(PDF) 19 Page - NXP Semiconductors |
|
|
|||||||||||||||||||||||||||||
SPC5643LFAMLL6 bảng dữ liệu(HTML) 19 Page - NXP Semiconductors |
|
19 / 136 page ![]() Introduction MPC5643L Microcontroller Data Sheet, Rev. 10 NXP Semiconductors 19 1.5.32 Sine Wave Generator (SWG) A digital-to-analog converter is available to generate a sine wave based on 32 stored values for external devices (ex: resolver). 1.5.33 Analog-to-Digital Converter module (ADC) The ADC module features include: Analog part: • 2 on-chip ADCs — 12-bit resolution SAR architecture — Same digital interface as in the MPC5604P family — A/D Channels: 9 external, 3 internal and 4 shared with other A/D (total 16 channels) — One channel dedicated to each T-sensor to enable temperature reading during application — Separated reference for each ADC — Shared analog supply voltage for both ADCs — One sample and hold unit per ADC — Adjustable sampling and conversion time Digital part: • 4 analog watchdogs comparing ADC results against predefined levels (low, high, range) before results are stored in the appropriate ADC result location • 2 modes of operation: CPU Mode or CTU Mode • CPU mode features — Register based interface with the CPU: one result register per channel — ADC state machine managing three request flows: regular command, hardware injected command, software injected command — Selectable priority between software and hardware injected commands — 4 analog watchdogs comparing ADC results against predefined levels (low, high, range) — DMA compatible interface • CTU mode features — Triggered mode only — 4 independent result queues (1 × 16 entries, 2 × 8 entries, 1 × 4 entries) — Result alignment circuitry (left justified; right justified) — 32-bit read mode allows to have channel ID on one of the 16-bit parts — DMA compatible interfaces • Built-in self-test features triggered by software 1.5.34 Cross Triggering Unit (CTU) The ADC cross triggering unit allows automatic generation of ADC conversion requests on user selected conditions without CPU load during the PWM period and with minimized CPU load for dynamic configuration. The CTU implements the following features: • Cross triggering between ADC, FlexPWM, eTimer, and external pins • Double buffered trigger generation unit with as many as 8 independent triggers generated from external triggers • Maximum operating frequency less than or equal to 120 MHz • Trigger generation unit configurable in sequential mode or in triggered mode • Trigger delay unit to compensate the delay of external low pass filter |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |