MCP79510-ISLASHMS datasheet(49/58 Pages) MICROCHIP

49 / 58 page

 2012-2022 Microchip Technology Inc. and its subsidiaries

DS20002300D-page 49

MCP7951X/MCP7952X

Microchip Technology Drawing C04-021-MS Rev E Sheet 2 of 2

10-Lead Plastic Micro Small Outline Package (MS) - 3x3 mm Body [MSOP]

For the most current package drawings, please see the Microchip Packaging Specification located at

http://www.microchip.com/packaging

Note:

REF: Reference Dimension, usually without tolerance, for information purposes only.

BSC: Basic Dimension. Theoretically exact value shown without tolerances.

Notes:

Pin 1 visual index feature may vary, but must be located within the hatched area.

Dimensions D and E1 do not include mold flash or protrusions. Mold flash or

Dimensioning and tolerancing per ASME Y14.5M.

protrusions shall not exceed 0.15mm per side.

Footprint

Mold Draft Angle

Lead Width

Lead Thickness

Dimension Limits

Overall Height

Molded Package Thickness

Molded Package Width

Overall Length

Foot Length

Standoff

Overall Width

Number of Pins

Pitch

Units

0.95 REF

0.08

0.15

0.23

0.33

MILLIMETERS

0.50 BSC

0.85

3.00 BSC

0.60

4.90 BSC

0.40

0.00

0.75

MIN

NOM

1.10

0.80

0.15

0.95

MAX

8°

0°

SEATING

PLANE

(L1)

DETAIL A

Foot Angle

15°

5°

MCP79510-I/MS bảng dữ liệu(PDF) 49 Page - Microchip Technology

MCP79510-I/MS bảng dữ liệu(HTML) 49 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58

bảng dữ liệu tải về

Link URL