AD9986 datasheet(27/37 Pages) AD

27 / 37 page

Data Sheet

AD9986

TYPICAL PERFORMANCE CHARACTERISTICS

analog.com

Rev. 0 | 27 of 37

Figure 30. Single-Tone NSD Measured at 10% Offset from fOUT vs. fOUT,

Shuffle Off vs. Shuffle On, fDAC = 11796.48 MSPS, 16-Bit Resolution, 15C

Mode

Figure 31. Dual Band ACLR Performance for Two 20 MHz LTE carriers at

fOUT = 1.88 GHz and fOUT = 2.145 GHz (See Figure 32 for a Wideband Plot),

Showing a Close Up of One Carrier at fOUT = 1.88 GHz, fDAC = 11.796 GSPS,

Test Vector PAR = 7.7 dB with −1 dBFS Back Off, Channel Interpolation 3×,

Main Interpolation 8×, 9C Mode

Figure 32. Dual Band Wideband Plot for Two 20 MHz LTE Carriers at fOUT

= 1.88 GHz and fOUT = 2.145 GHz (3GPP Bands, B1 and B3, Respectively),

at fDAC = 11.796 GSPS, Test Vector PAR = 7.7 dB with −1 dBFS Back Off ,

Channel Interpolation 3×, Main Interpolation 8×, 9C Mode

Figure 33. Single-Tone NSD Measured at 10% Offset from fOUT vs. fOUT,

Shuffle Off vs. Shuffle On, fDAC = 11796.48 MSPS, 12-Bit Resolution, 24C

Mode

Figure 34. Dual Band ACLR Performance for two 20 MHz LTE carriers at

fOUT = 1.88 GHz and fOUT = 2.145 GHz (See Figure 32 for a Wideband Plot),

Showing a Close-up of One Carrier at fOUT = 2.145 GHz, fDAC = 11.796 GSPS,

Test Vector PAR = 7.7 dB with −1 dBFS Back Off, Channel Interpolation 3×,

Main Interpolation 8×, 9C Mode

Figure 35. Adjacent Channel Leakage Ratio (ACLR) Performance for 100 MHz

5G Test Vector at fOUT = 3.9 GHz and fDAC = 11.898 GSPS, Test Vector Peak to

RMS = 11.7 dB with −1 dBFS Back Off (9C Mode), Channel Interpolation 3×,

Main Interpolation 8×

AD9986 bảng dữ liệu(PDF) 27 Page - Analog Devices