STM8S103F2 datasheet(87/121 Pages) STMICROELECTRONICS

87 / 121 page

DocID15441 Rev 14

87/121

STM8S103F2 STM8S103F3 STM8S103K3

Electrical characteristics

Electromagnetic interference (EMI)

Based on a simple application running on the product (toggling 2 LEDs through the I/O

ports), the product is monitored in terms of emission. This emission test is in line with the

norm IEC 61967-2 which specifies the board and the loading of each pin.

Absolute maximum ratings (electrical sensitivity)

Based on two different tests (ESD, DLU and LU) using specific measurement methods, the

product is stressed to determine its performance in terms of electrical sensitivity. For more

details, refer to the application note AN1181.

Electrostatic discharge (ESD)

Electrostatic discharges (a positive then a negative pulse separated by 1 second) are

applied to the pins of each sample according to each pin combination. The sample size

depends on the number of supply pins in the device (3 parts x (n+1) supply pin). One model

can be simulated: Human body model. This test conforms to the JESD22-A114A/A115A

standard. For more details, refer to the application note AN1181.

Static latch-up

Two complementary static tests are required on 10 parts to assess the latch-up

performance.

•

A supply overvoltage (applied to each power supply pin), and

•

A current injection (applied to each input, output and configurable I/O pin) are

performed on each sample.

Table 49. EMI data

Symbol

Parameter

Conditions

Unit

General conditions

Monitored

frequency band

Max fCPU(1)

1. Guaranteed by characterization results.

16 MHz/

8 MHz

16 MHz/

16 MHz

SEMI

Peak level

VDD = 5 V,

TA = 25 °C,

LQFP32 package.

Conforming to

IEC 61967-2

0.1 MHz to 30 MHz

dBµV

30 MHz to 130 MHz

130 MHz to 1 GHz

EMI level

2.5

Table 50. ESD absolute maximum ratings

Symbol

Ratings

Conditions

Class

Maximum

value(1)

1. Guaranteed by characterization results

Unit

VESD(HBM)

Electrostatic discharge voltage

(Human body model)

TA = 25°C, conforming to

JESD22-A114

4000

VESD(CDM)

Electrostatic discharge voltage

(Charge device model)

TA= 25°C, conforming to

SD22-C101

LQFP32 package

1000

STM8S103F2 bảng dữ liệu(PDF) 87 Page - STMicroelectronics

STM8S103F2 bảng dữ liệu(HTML) 87 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

bảng dữ liệu tải về

Link URL