| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
STM32L15XCC bảng dữ liệu(PDF) 86 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STM32L15XCC bảng dữ liệu(HTML) 86 Page - STMicroelectronics |
|
86 / 136 page ![]() Electrical characteristics STM32L151xC STM32L152xC 86/136 DocID022799 Rev 13 Output driving current The GPIOs (general purpose input/outputs) can sink or source up to ±8 mA, and sink or source up to ±20 mA with the non-standard VOL/VOH specifications given in Table 44. In the user application, the number of I/O pins which can drive current must be limited to respect the absolute maximum rating specified in Section 6.2: • The sum of the currents sourced by all the I/Os on VDD, plus the maximum Run consumption of the MCU sourced on VDD, cannot exceed the absolute maximum rating IVDD(Σ) (see Table 12). • The sum of the currents sunk by all the I/Os on VSS plus the maximum Run consumption of the MCU sunk on VSS cannot exceed the absolute maximum rating IVSS(Σ) (see Table 12). Output voltage levels Unless otherwise specified, the parameters given in Table 44 are derived from tests performed under the conditions summarized in Table 14. All I/Os are CMOS and TTL compliant. Table 44. Output voltage characteristics Symbol Parameter Conditions Min Max Unit VOL(1)(2) 1. The IIO current sunk by the device must always respect the absolute maximum rating specified in Table 12 and the sum of IIO (I/O ports and control pins) must not exceed IVSS. 2. Guaranteed by test in production. Output low level voltage for an I/O pin IIO = 8 mA 2.7 V < VDD < 3.6 V -0.4 V VOH(2)(3) 3. The IIO current sourced by the device must always respect the absolute maximum rating specified in Table 12 and the sum of IIO (I/O ports and control pins) must not exceed IVDD. Output high level voltage for an I/O pin VDD-0.4 - VOL (3)(4) Output low level voltage for an I/O pin IIO = 4 mA 1.65 V < VDD < 3.6 V -0.45 VOH (3)(4) Output high level voltage for an I/O pin VDD-0.45 - VOL(1)(4) 4. Guaranteed by characterization results. Output low level voltage for an I/O pin IIO = 20 mA 2.7 V < VDD < 3.6 V -1.3 VOH(3)(4) Output high level voltage for an I/O pin VDD-1.3 - |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |