STM32F469AE datasheet(30/220 Pages) STMICROELECTRONICS

30 / 220 page

Functional overview

STM32F469xx

30/220

DS11189 Rev 7

–

VCAPDSI pin must be connected externally to VDD12DSI but the external

capacitor is no more needed.

–

VSSDSI pin must be grounded.

2.19

Power supply supervisor

2.19.1

Internal reset ON

On packages embedding the PDR_ON pin, the power supply supervisor is enabled by

holding PDR_ON high. On other packages the power supply supervisor is always enabled.

The device has an integrated power-on reset (POR)/ power-down reset (PDR) circuitry

coupled with a Brownout reset (BOR) circuitry. At power-on, POR/PDR is always active and

ensures proper operation starting from 1.8 V. After the 1.8 V POR threshold level is

reached, the option byte loading process starts, either to confirm or modify default BOR

thresholds, or to disable BOR permanently. Three BOR thresholds are available through

option bytes. The device remains in reset mode when VDD is below a specified threshold,

VPOR/PDR or VBOR, without the need for an external reset circuit.

The device also features an embedded programmable voltage detector (PVD) that monitors

the VDD/VDDA power supply and compares it to the VPVD threshold. An interrupt can be

generated when VDD/VDDA drops below the VPVD threshold and/or when VDD/VDDA is

higher than the VPVD threshold. The interrupt service routine can then generate a warning

message and/or put the MCU into a safe state. The PVD is enabled by software.

2.19.2

Internal reset OFF

This feature is available only on packages featuring the PDR_ON pin. The internal power-on

reset (POR) / power-down reset (PDR) circuitry is disabled through the PDR_ON pin.

An external power supply supervisor should monitor VDD and NRST and should maintain

the device in reset mode as long as VDD is below a specified threshold. PDR_ON must be

connected to VSS, as shown in Figure 8.

Figure 8. Power supply supervisor interconnection with internal reset OFF

PDR_ON

STM32F469xx

VSS

PDR not active: 1.7 V < VDD < 3.6 V

VBAT

VDD

Application reset

signal (optional)

MS38296V1

STM32F469AE bảng dữ liệu(PDF) 30 Page - STMicroelectronics

STM32F469AE bảng dữ liệu(HTML) 30 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

bảng dữ liệu tải về

Link URL