UCD7100APWPR datasheet(16/30 Pages) TI

tên linh kiện	UCD7100APWPR

Giải thích chi tiết về linh kiện	UCD7100 Digital Control Compatible Single Low-Side 짹4-A MOSFET Driver with Current Sense

PDF	30 Pages

Scroll/Zoom	100%

nhà sản xuất	TI [Texas Instruments]

Trang chủ	http://www.ti.com

Logo

16 / 30 page

10.2.2 Detailed Design Procedure

The cycle-by-cycle current protection is implemented by connecting the current sense signal to the CS pin.

When the CS level is greater than the ILIM voltage minus 25 mV, the output of the driver is forced low and the

current limit flag (CLF) is set high. The CLF signal is latched high until the UCD7K device receives the next rising

edge on the IN pin.

(6)

(7)

The current limit threshold can be set to any value between 0.25 V and 1.0 V, so Rsense must be between 0.045

Ω and 0.195 Ω. For example, if Rsense is 0.15 Ω, then VILIM must be 0.775 V to protect input current at 5 A. If

the digital controller has an internal digital-to-analog converter, then it can generate 0.775 V and connect to ILIM

directly. For a digital controller without an internal digital-to-analog converter, it can generate a PWM signal, send

the PWM signal through a low pass filter, then connect to the ILIM pin. Assuming the magnitude of the PWM

pulse is 3.3 V, then the duty cycle is:

(8)

10.2.3 Application Curve

t − Time − 40 ns/div

Figure 10-2. Output Rise and Fall Time (VDD = 12 V, CLOAD = 10 NF)

UCD7100

SLUS651E – MARCH 2005 – REVISED NOVEMBER 2021

www.ti.com

Submit Document Feedback

Product Folder Links: UCD7100

UCD7100APWPR bảng dữ liệu(PDF) 16 Page - Texas Instruments