S12SCIV2 datasheet(85/124 Pages) MOTOROLA

85 / 124 page

MC9S12DT128B Device User Guide — V01.07

A.1.5 Absolute Maximum Ratings

Absolute maximum ratings are stress ratings only. A functional operation under or outside those maxima

is not guaranteed. Stress beyond those limits may affect the reliability or cause permanent damage of the

device.

This device contains circuitry protecting against damage due to high static voltage or electrical fields;

however, it is advised that normal precautions be taken to avoid application of any voltages higher than

maximum-rated voltages to this high-impedance circuit. Reliability of operation is enhanced if unused

inputs are tied to an appropriate logic voltage level (e.g., either VSS5 or VDD5).

A.1.6 ESD Protection and Latch-up Immunity

All ESD testing is in conformity with CDF-AEC-Q100 Stress test qualification for Automotive Grade

Integrated Circuits. During the device qualification ESD stresses were performed for the Human Body

Model (HBM), the Machine Model (MM) and the Charge Device Model.

Table A-1 Absolute Maximum Ratings1

NOTES:

1. Beyond absolute maximum ratings device might be damaged.

Num

Rating

Symbol

Min

Max

Unit

I/O, Regulator and Analog Supply Voltage

VDD5

-0.3

6.0

Digital Logic Supply Voltage 2

2. The device contains an internal voltage regulator to generate the logic and PLL supply out of the I/O supply.

The absolute maximum ratings apply when the device is powered from an external source.

VDD

-0.3

3.0

PLL Supply Voltage 2

VDDPLL

-0.3

3.0

Voltage difference VDDX to VDDR and VDDA

∆

VDDX

-0.3

0.3

Voltage difference VSSX to VSSR and VSSA

∆

VSSX

-0.3

0.3

Digital I/O Input Voltage

VIN

-0.3

6.0

Analog Reference

VRH, VRL

-0.3

6.0

XFC, EXTAL, XTAL inputs

VILV

-0.3

3.0

TEST input

VTEST

-0.3

10.0

Instantaneous Maximum Current

Single pin limit for all digital I/O pins 3

3. All digital I/O pins are internally clamped to VSSX and VDDX, VSSR and VDDR or VSSA and VDDA.

-25

+25

Instantaneous Maximum Current

Single pin limit for XFC, EXTAL, XTAL4

4. Those pins are internally clamped to VSSPLL and VDDPLL.

-25

+25

Instantaneous Maximum Current

Single pin limit for TEST 5

5. This pin is clamped low to VSSPLL, but not clamped high. This pin must be tied low in applications.

-0.25

Storage Temperature Range

stg

– 65

155

°C

S12SCIV2 bảng dữ liệu(PDF) 85 Page - Motorola, Inc

S12SCIV2 bảng dữ liệu(HTML) 85 Page - Motorola, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

bảng dữ liệu tải về

Link URL