STM32H750VB datasheet(44/335 Pages) STMICROELECTRONICS

44 / 335 page

Functional overview

STM32H750VB STM32H750ZB STM32H750IB STM32H750XB

44/334

DS12556 Rev 5

3.30

Real-time clock (RTC), backup SRAM and backup registers

The RTC is an independent BCD timer/counter. It supports the following features:



Calendar with subsecond, seconds, minutes, hours (12 or 24 format), week day, date,

month, year, in BCD (binary-coded decimal) format.



Automatic correction for 28, 29 (leap year), 30, and 31 days of the month.



Two programmable alarms.



On-the-fly correction from 1 to 32767 RTC clock pulses. This can be used to

synchronize it with a master clock.



Reference clock detection: a more precise second source clock (50 or 60 Hz) can be

used to enhance the calendar precision.



Digital calibration circuit with 0.95 ppm resolution, to compensate for quartz crystal

inaccuracy.



Three anti-tamper detection pins with programmable filter.



Timestamp feature which can be used to save the calendar content. This function can

be triggered by an event on the timestamp pin, or by a tamper event, or by a switch to

VBAT mode.



17-bit auto-reload wakeup timer (WUT) for periodic events with programmable

resolution and period.

The RTC and the 32 backup registers are supplied through a switch that takes power either

from the VDD supply when present or from the VBAT pin.

The backup registers are 32-bit registers used to store 128 bytes of user application data

when VDD power is not present. They are not reset by a system or power reset, or when the

device wakes up from Standby mode.

The RTC clock sources can be:



A 32.768 kHz external crystal (LSE)



An external resonator or oscillator (LSE)



The internal low-power RC oscillator (LSI, with typical frequency of 32 kHz)



The high-speed external clock (HSE) divided by 32.

The RTC is functional in VBAT mode and in all low-power modes when it is clocked by the

LSE. When clocked by the LSI, the RTC is not functional in VBAT mode, but is functional in

all low-power modes.

All RTC events (Alarm, Wakeup Timer, Timestamp or Tamper) can generate an interrupt and

wakeup the device from the low-power modes.

STM32H750VB bảng dữ liệu(PDF) 44 Page - STMicroelectronics

STM32H750VB bảng dữ liệu(HTML) 44 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

bảng dữ liệu tải về

Link URL