FEDL2250DIGEST-09

OKI Semiconductor

ML2250 family

36/36

NOTICE

1. The information contained herein can change without notice owing to product and/or technical improvements.

Before using the product, please make sure that the information being referred to is up-to-date.

2. The outline of action and examples for application circuits described herein have been chosen as an explanation

for the standard action and performance of the product. When planning to use the product, please ensure that the

external conditions are reflected in the actual circuit, assembly, and program designs.

3. When designing your product, please use our product below the specified maximum ratings and within the

specified operating ranges including, but not limited to, operating voltage, power dissipation, and operating

temperature.

4. Oki assumes no responsibility or liability whatsoever for any failure or unusual or unexpected operation

resulting from misuse, neglect, improper installation, repair, alteration or accident, improper handling, or

unusual physical or electrical stress including, but not limited to, exposure to parameters beyond the specified

maximum ratings or operation outside the specified operating range.

5. Neither indemnity against nor license of a third party’s industrial and intellectual property right, etc. is granted

by us in connection with the use of the product and/or the information and drawings contained herein. No

responsibility is assumed by us for any infringement of a third party’s right which may result from the use

thereof.

6. The products listed in this document are intended for use in general electronics equipment for commercial

applications (e.g., office automation, communication equipment, measurement equipment, consumer

electronics, etc.). These products are not, unless specifically authorized by Oki, authorized for use in any

system or application that requires special or enhanced quality and reliability characteristics nor in any system

or application where the failure of such system or application may result in the loss or damage of property, or

death or injury to humans.

Such applications include, but are not limited to, traffic and automotive equipment, safety devices, aerospace

equipment, nuclear power control, medical equipment, and life-support systems.

7. Certain products in this document may need government approval before they can be exported to particular

countries. The purchaser assumes the responsibility of determining the legality of export of these products and

will take appropriate and necessary steps at their own expense for these.

8. No part of the contents contained herein may be reprinted or reproduced without our prior permission.

Copyright 2005 Oki Electric Industry Co., Ltd.