SH7041A datasheet(650/923 Pages) RENESAS

650 / 923 page

612

• Bit 0—PA16 Mode (PA16MD): Selects the function of the PA16/AH pin.

Bit 0: PA16MD

Description

General input/output (PA16) (initial value)

Address hold output (

AH) (PA16 in single chip mode)

18.3.4

Port A Control Registers L1, L2 (PACRL1 and PACRL2)

PACRL1 and PACRL2 are 16-bit read/write registers that select the functions of the least

significant sixteen multiplexed pins of port A. PACRL1 selects the function of the PA15/CK–

PA8/TCLKC/

IRQ2 pins of port A; PACRL2 selects the function of the PA7/TCLKB/CS3–

PA0/RXD0 pins of port A.

Port A has bus control signals (

RD, WRH, WRL, CS0–CS3, AH) and DMAC control signals

(DREQ0–DREQ1), but there are instances when the register settings that select these pin functions

will be ignored, depending on the operation mode. Refer to table 18.2, Pin Arrangement by Mode,

for details.

PACRL1 is initialized by external power-on reset to H'4000 in extended mode, and to H'0000 in

single chip mode. PACRL2 is initialized by external power-on reset to H'0000. Neither register is

initialized by manual resets, reset by WDT, standby mode, or sleep mode, so the previous data is

maintained.

Port A Control Register L1 (PACRL1):

Bit:

—

PA15MD

—

PA14MD

—

PA13MD

—

PA12MD

Initial value:

0(1)*

000

R/W:

R/W

Bit:

—

PA11MD

—

PA10MD PA9MD1 PA9MD0 PA8MD1 PA8MD0

Initial value:

R/W:

R/W

Note: * Bit 14 is initialized to 1 in extended mode.

• Bit 15—Reserved: This bit always reads as 0. The write value should always be 0.

SH7041A bảng dữ liệu(PDF) 650 Page - Renesas Technology Corp

SH7041A bảng dữ liệu(HTML) 650 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

bảng dữ liệu tải về

Link URL