 |
công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
|
công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
R7K4FE-6-DC16-R bảng dữ liệu(PDF) 1 Page - M-System Co.,Ltd. |
|
|
|||||||||||||||||||||||||||||
R7K4FE-6-DC16-R bảng dữ liệu(HTML) 1 Page - M-System Co.,Ltd. |
|
|
1 / 7 page  MODEL: R7K4FE-6-DC16 R7K4FE-6-DC16 SPECIFICATIONS ES-7778-A Rev.2 Page 1/7 https://www.m-system.co.jp/ Remote I/O R7K4F Series ETHERNET I/O MODULE (Modbus/TCP (Ethernet), reray contact output, 16 points, screw terminal block) Functions & Features • 16 points relay contact output module for Modbus/TCP (Ethernet) 53.5 (2.11) mm (inch) 47 (1.85) 210 (8.27) MODEL: R7K4FE-6-DC16-R[1] ORDERING INFORMATION • Code number: R7K4FE-6-DC16-R[1] Specify a code from below for [1]. (e.g. R7K4FE-6-DC16-R/Q) • Specify the specification for option code /Q (e.g. /C01) TERMINAL BLOCK 6: Screw terminal block for power supply RJ-45 Modular jack for communication Screw terminal block for I/O I/O TYPE DC16: Relay contact output, 16 points POWER INPUT DC power R: 24 V DC (Operational voltage range: ±10 %; ripple 10 %p-p max.) [1] OPTIONS blank: none /Q: With options (specify the specification) SPECIFICATIONS OF OPTION: Q COATING (For the detail, refer to M-System's web site.) /C01: Silicone coating /C02: Polyurethane coating /C03: Rubber coating RELATED PRODUCTS • PC configurator software (model: R7CFG) Downloadable at M-System’s web site. A dedicated cable is required to connect the module to the PC. Please refer to the internet software download site or the users manual for the PC configurator for applicable cable types. GENERAL SPECIFICATIONS Connection Ethernet: RJ-45 Modular Jack Power input, output: M3 separable screw terminal (torque 0.5 N·m) Solderless terminal: Refer to the drawing at the end of the section. Recommended manufacturer: Japan Solderless Terminal MFG.Co.Ltd, Nichifu Co.,ltd Applicable wire size: 0.25 to 1.65 mm2 (AWG 22 to 16) Screw terminal: Nickel-plated steel Housing material: Flame-resistant resin (gray) Isolation: Output 0 to output 1 to output 2 to output 3 to output 4 to output 5 to output 6 to output 7 to output 8 to output 9 to output 10 to output 11 to output 12 to output 13 to output 14 to output 15 to Ethernet or FE to power Output at the loss of communication: Output hold (*), Output clear Selectable with the front DIP SW (*) factory default setting Status indicator LEDs: PWR, ERR indicate the module’s operating conditions. (Refer to the insruction manual) Discrete output status indicator LED: Green LED; turns on with output ON ■Recommended solderless terminal 3.3 (.13) max mm (inch) ETHERNET COMMUNICATION Communication Standard: IEEE 802.3u Transmission: 10BASE-T, 100BASE-TX Baud rate: 10/100 Mbps (Auto Negotiation function) Protocol: Modbus/TCP |
Số phần tương tự - R7K4FE-6-DC16-R |
|
Mô tả tương tự - R7K4FE-6-DC16-R |
|
|
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Vietnamese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
