Maxim Integrated │ 7

www.maximintegrated.com

Evaluates: MAXPICO2PMB#

MAXPICO2PMB Adapter Board

MAXPICO2PMB Register Map Tool GUI

Follow these steps to use the MAX20342 regmap file:

1) Follow the Procedure and the status of the GUI

shows

2) Under

File, choose Open Register File, Browse for

the MAX20342 regmap file, then click

OK. The sta-

tus shows

Connected. The Slave Address column

0x6A. All MAX20342 specific details are filled in the

Register Map tab, and default register values are

loaded (see Figure 9).

3) Go to Register Address 0x16 COMM_CTRL2 and

locate bit 3 (Enable Force DB Output). Click on the

DBFrc bit so it becomes bold and click Write to set

this bit. Locate bit 4 (DB Output) and set this bit. LED

D6 of the MAX20342EVKIT turns red (see Figure 10).

Figure 9. Open the MAX20342 Regmap File in MAXPICO2PMB Register Map Tool