LTM4677 datasheet(99/110 Pages) AD

99 / 110 page

LTC3888-1

Rev. 0

For more information www.analog.com

FAULT RESPONSE AND COMMUNICATION

COMMAND NAME

CMD

CODE DESCRIPTION

TYPE

PAGED

DATA

FORMAT UNITS NVM

DEFAULT

VALUE

VIN_OV_FAULT_RESPONSE

0x56 VIN overvoltage fault response.

R/W Byte

Reg

0x80

VOUT_OV_FAULT_RESPONSE

0x41 VOUT overvoltage fault response.

R Byte

Reg

0x80

VOUT_UV_FAULT_RESPONSE

0x45 VOUT undervoltage fault response.

R/W Byte

Reg

0xB8

IOUT_OC_FAULT_RESPONSE

0x47 Output overcurrent fault response.

R/W Byte

Reg

0x00

OT_FAULT_RESPONSE

0x50 External overtemperature fault response.

R/W Byte

Reg

0xB8

MFR_OT_FAULT_RESPONSE

0xD6 Internal overtemperature fault response.

R/W Byte

Reg

0xC0

TON_MAX_FAULT_RESPONSE

0x63 Fault response when

TON_MAX_FAULT_LIMIT is exceeded.

R/W Byte

Reg

0xB8

MFR_RETRY_DELAY

0xDB Minimum time before retry after a fault.

R/W Word

L11

350ms

0xFABC

SMBALERT_MASK

0x1B Mask ALERT Activity.

Block R/W

Reg

See

Following

Details

MFR_FAULT_PROPAGATE

0xD2 Configure fault propagation via FAULT pins.

R/W Word

Reg

0x6993

MFR_FAULT_RESPONSE

0xD5 PWM response when FAULT pin is low due to

external fault.

R/W Byte

Reg

0xC0

MFR_FAULT_LOG

0xEE Read fault log data.

R Block

Reg

MFR_FAULT_LOG_CLEAR

0xEC Clear existing EEPROM fault log.

Send Byte

Related commands: STATUS_BYTE, STATUS_WORD, MFR_PADS_LTC3888-1, MFR_RESTART_DELAY, MFR_FAULT_LOG_STORE, CLEAR_FAULTS

These commands detail programmable device responses for detected faults beyond the hardware-level actions

described in the Operation section. LTC3888-1 hardware-level fault responses cannot be modified. PMBus warning

event responses are listed under _WARN_LIMIT command details.

VIN_OV_FAULT_RESPONSE

The VIN_OV_FAULT_RESPONSE command instructs the device on what action to take in response to an input over-

voltage fault. The format for this command is given in Table 14. The device also:

• Sets the INPUT Bit in the STATUS_WORD

• Sets the VIN Overvoltage Fault Bit in the STATUS_INPUT Command

• Notifies the Host by Asserting ALERT, Unless Masked

This command has one data byte.

PMBus COMMAND DETAILS (Fault Response and Communication)

LTM4677 bảng dữ liệu(PDF) 99 Page - Analog Devices

LTM4677 bảng dữ liệu(HTML) 99 Page - Analog Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

bảng dữ liệu tải về

Link URL