3

Contact Adhesive 2000-NF with Spray Activator #1

Product Description

3M™ Fastbond™ Contact Adhesive 2000-NF with Spray Activator #1 is a water-

dispersed, high solid, activated adhesive which provides immediate bonding

capabilities and handling strength without forced drying equipment for most

applications.

Features

• Immediate bonding without heat.

• Immediate handling strength.

• Bonds flexible polyurethane and latex foams, plastic laminate, wood, plywood,

particle board, fabrics, fiber, aluminum, galvanized steel and many plastics.

• Post-formable and heat resistant.

• Co-sprayed with plural component, external mix spray systems – no premixing,

no limited pot life.

• Available in blue, light orange or neutral color.

• Not recommended for bonding bare steel surfaces (unless force dried and

protected from moisture). Primed or painted steel surfaces must be thoroughly

tested for corrosion and compatibility with Fastbond contact adhesive 2000-NF

with spray activator #1 before use.

• Designed to be applied between two substrates. Application to substrates that

results in direct exposure of the adhesive to light may result in eventual

discoloration of the exposed adhesive. Direct exposure can be controlled by

proper spray application. Adhesive may soak through very thin fabrics.

Materials: Adhesive and Sealants

Materials: Flooring Materials

Materials: Composite Wood and Agrifiber Products

Materials: Furniture and Furnishings

Materials: Ceiling and Wall Systems

Technical Data

September, 2010

Special Note

When bonding wood veneers, success is dependent on many variables such as

environmental conditions, bonding process, type of base material, type of veneer,

adhesive type and top coat finishing systems to name a few. For unbacked wood

veneers, water based contact adhesives are not recommended. It is the user’s

responsibility to thoroughly test any adhesive for its suitability in bonding wood

veneers. It is also recommended to follow the veneer manufacturers

recommendation and industry guidelines.