Features
■ Immediate bonding without heat.
■ Immediate handling strength.
■ Bonds flexible polyurethane and latex foams, plastic laminate, wood, plywood, particle board, fabrics, fiber, aluminum, galvanized steel and many plastics.
■ Post-formable and heat resistant.
■ Co-sprayed with plural component, external mix spray systems – no premixing, no limited pot life.
■ Available in blue, light orange or neutral color.
■ Not recommended for bonding bare steel surfaces (unless force dried and protected from moisture). Primed or painted steel surfaces must be thoroughly tested for corrosion and compatibility with Fastbond contact adhesive 2000-NF with spray activator #1 before use.
■ Designed to be applied between two substrates. Application to substrates that results in direct exposure of the adhesive to light may result in eventual discoloration of the exposed adhesive. Direct exposure can be controlled by proper spray application. Adhesive may soak through very thin fabrics.
■ Certified to GREENGUARD® Product Emission Standard For Children and Schools(SM) for low emitting interior building materials: ° Addresses or Contributes to LEED™ EQ Credit 4.1: Low Emitting Materials: Adhesive and Sealants ° Addresses or Contributes to LEED™ EQ Credit 4.3: Low Emitting Materials: Flooring Materials ° Addresses or Contributes to LEED™ EQ Credit 4.4: Low Emitting Materials: Composite Wood and Agrifiber Products ° Addresses or Contributes to LEED™ EQ Credit 4.5: Low Emitting Materials: Furniture and Furnishings ° Addresses or Contributes to LEED™ EQ Credit 4.6: Low Emitting Materials: Ceiling and Wall Systems Technical Data September, 2010 Special Note When bonding wood veneers, success is dependent on many variables such as environmental conditions, bonding process, type of base material, type of veneer, adhesive type and top coat finishing systems to name a few. For unbacked wood veneers, water based contact adhesives are not recommended. It is the user’s responsibility to thoroughly test any adhesive for its suitability in bonding wood veneers. It is also recommended to follow the veneer manufacturers recommendation and industry guidelines.