| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
TLE4943C bảng dữ liệu(PDF) 18 Page - Infineon Technologies AG |
|
|
|||||||||||||||||||||||||||||
TLE4943C bảng dữ liệu(HTML) 18 Page - Infineon Technologies AG |
|
18 / 48 page ![]() TLE4943C Data Sheet 18 V 1.2, July 2018 Figure 12 Protocol at standstill Note on the standstill - travel transition: If an increment of the magnetic encoder is detected, the standstill protocol will be aborted. The speed pulse Ihigh with the initiating initial bit (with the level Ilow) has precedence. Due to the suppression of "bit stumps" also required in the standstill protocol, the cutting of the protocol can actually only take place between two data bits, and not during an ongoing bit transmission. The initial bit enables the speed pulse to always be preceded by a current level Ilow for a duration of at least tp/2. This is helpful for the detection of the speed pulse in the ECU (electronic control unit). Zero Crossing Speed pulse Data protocol Sensor output current Is Initial bit Speed replacement pulse Initial bit tp tp/2 tp tp tp tp tp tp tp tp tp bit0 bit5 bit4 bit3 bit2 bit1 bit7 bit6 Parity tstop tp/2 |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |