X11SSL-F datasheet(98/124 Pages) ETC1

98 / 124 page

X11SSM(-F)/X11SSL(-F) User Manual



iSCSi Configuration

iSCSI Initiator Name

This feature allows the user to enter the unique name of the iSCSI Initiator in IQN format.

Once the name of the iSCSI Initiator is entered into the system, configure the proper settings

for the following items.

Add an Attempt

Delete Attempts

Change Attempt order



Intel I210 Gigabit Network Connection - OC:C4:7A:1A:44:CE



NIC Configuration

Link Speed

This feature allows the user to specify the port speed used for the selected boot protocol.

The options are

Auto Negotiated, 10 Mbps Half, 10 Mbps Full, 100 Mbps Half, and 100

Mbps Full.

Wake On LAN

Select Enabled for Wake_On_LAN support, which will allow the system to "wake up" when

an onboard device receives an incoming signal. The options are

Disabled and Enabled.

Blink LEDs

Use this feature to identify the physical network port by blinking the associated LED. Use the

keybaord to select a value.

UEFI Driver

This item displays the UEFI driver version.

Adapter PBA

This item displays the Processor Bus Adapter (PBA) model number. The PBA number is a

nine digit number (i.e., 010B00-000) located near the serial number.

Device Name

This item displays the adapter device name.

Chip Type

This item displays the network adapter chipset name.

X11SSL-F bảng dữ liệu(PDF) 98 Page - List of Unclassifed Manufacturers