STM32F722IC datasheet(184/229 Pages) STMICROELECTRONICS

184 / 229 page

Electrical characteristics

STM32F722xx STM32F723xx

184/229

DS11853 Rev 6

Synchronous waveforms and timings

Figure 66 through Figure 69 represent synchronous waveforms and Table 101 through

Table 104 provide the corresponding timings. The results shown in these tables are

obtained with the following FMC configuration:

•

BurstAccessMode = FMC_BurstAccessMode_Enable;

•

MemoryType = FMC_MemoryType_CRAM;

•

WriteBurst = FMC_WriteBurst_Enable;

•

CLKDivision = 1;

•

DataLatency = 1 for NOR Flash; DataLatency = 0 for PSRAM

•

CL = 30 pF on data and address lines. CL = 10 pF on FMC_CLK unless otherwise

specified.

In all timing tables, the THCLK is the HCLK clock period.

–For 2.7 V≤ VDD≤ 3.6 V, maximum FMC_CLK = 108 MHz at CL=20 pF or 90 MHz at

CL=30 pF (on FMC_CLK).

–For 1.71 V≤ VDD<2.7 V, maximum FMC_CLK = 70 MHz at CL=10 pF (on FMC_CLK).

1. Guaranteed by characterization results.

Table 100. Asynchronous multiplexed PSRAM/NOR write-NWAIT timings(1)

1. Guaranteed by characterization results.

Symbol

Parameter

Min

Max

Unit

tw(NE)

FMC_NE low time

9Thclk - 1

9Thclk + 1

tw(NWE)

FMC_NWE low time

7Thclk -0.5

7Thclk + 0.5

tsu(NWAIT_NE)

FMC_NWAIT valid before FMC_NEx high

6Thclk + 2

th(NE_NWAIT)

FMC_NEx hold time after FMC_NWAIT

invalid

4Thclk - 1

STM32F722IC bảng dữ liệu(PDF) 184 Page - STMicroelectronics

STM32F722IC bảng dữ liệu(HTML) 184 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

bảng dữ liệu tải về

Link URL