LP1115-01

Dec.-2019

www.lowpowersemi.com

Page 4 of 10

Preliminary Datasheet

LP1115

Absolute Maximum Ratings

Note 1



VCC1/2 to GND1/2 ------------------------------------------------------------------------------------------- -0.3V to 15V



EN1/2 to GND1/2 --------------------------------------------------------------------------------------------- -0.3V to 15V



BST1/2 to GND1/2 ------------------------------------------------------------------------------------------- -0.3V to 35V



BST1/2 to SW1/2 --------------------------------------------------------------------------------------------- -0.3V to 15V



SW1/2 to GND1/2------------------------------------------------------------------------------------------------- -5V to 20V



DRVH1/2 to GND1/2 ------------------------------------------------------------------ SW1/2-0.3V to BST1/2+0.3V



DRVL1/2 to GND1/2 ---------------------------------------------------------------------------- -0.3V to VCC1/2+0.3V



PWM1/2 to GND1/2 ----------------------------------------------------------------------------------------- -0.3V to 6.5V



BVCC to BGND ----------------------------------------------------------------------------------------------- -0.3V to 26V



BSW to BGND ------------------------------------------------------------------------------------------------ -0.3V to 30V



BEN to BGND ------------------------------------------------------------------------------------------------- -0.3V to 26V



FB to BGND ----------------------------------------------------------------------------------------------------- -0.3V to 6V



Maximum Junction Temperature ---------------------------------------------------------------------------------- 150℃



Maximum Soldering Temperature (at leads,10 sec) --------------------------------------------------------- 260℃



Storage Temperature ------------------------------------------------------------------------------------- -65℃ to 150℃



Operating Ambient Temperature Range -------------------------------------------------------------- -40℃ to 85℃

Note 1.

Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress

ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational

sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect

device reliability.

Thermal Information





ESD Susceptibility



HBM(Human Body Mode) --------------------------------------------------------------------------------------------- 2KV



MM(Machine Mode) --------------------------------------------------------------------------------------------------- 200V