Final Datasheet

4

Rev. 1.0

2018-04-04

TLE5014D

Dual Sensor Angle Output

2

Dual Sensor Angle Output

The bottom sensor element of the Product_Short is flipped relative to the orientation of the top sensor

element Therefore the rotation direction sensed by the bottom element is opposite to the top element. This

is advantageous for safety critical applications, as the two sensor elements do generally not output the same

angle. Figure 2-1 shows the output of the two sensor ICs for a given external magnetic field orientation.

Figure 2-1 Dual die angle output

For applications where an identical angle output of both ICs is desired, the rotation direction and angle offset

of one sensor IC can be reconfigured by changing the settings in the ANG_BASE register of the EEPROM.

9

IFC-2

O

address coding for programming in bus mode,

channel 2 (see TLE5014 datasheet)

connect to IF3

10

IFB-2

I/O

SENT / SPC / PWM / SICI interface for channel 2

11

IFA-2

-

connect to GND

12

GND-2

-

supply voltage, ground for channel 2

13

VDD-2

-

supply voltage, positive for channel 2

14

IF3-2

I

connect to IFC

15

IF2-2

I

address coding for programming in bus mode,

channel 2 (see TLE5014 datasheet)

connect to GND for SENT / PWM interface

16

IF1-2

I

address coding for programming in bus mode,

channel 2 (see TLE5014 datasheet)

connect to GND for SENT / PWM interface

Table 1-1

Pin Description (cont’d)

Pin No.

Symbol

In/Out

Function

0°

90°

180°270°360°

90°

180°

270°

360°

top sensor output

bottom sensor output

external magnetic field angle