TUSB216 datasheet(4/33 Pages) TI1

tên linh kiện	TUSB216

Giải thích chi tiết về linh kiện	TUSB216 USB 2.0 High-speed Signal Conditioner With Battery Charging Controller

PDF	33 Pages

Scroll/Zoom	100%

nhà sản xuất	TI1 [Texas Instruments]

Trang chủ	http://www.ti.com

Logo

4 / 33 page

TUSB216

SLLSEZ6A – FEBRUARY 2019 – REVISED DECEMBER 2019

www.ti.com

Product Folder Links: TUSB216

Submit Documentation Feedback

Pin Functions (continued)

I/O

INTERNAL

PULLUP/PULLDOWN

DESCRIPTION

NAME

NO.

RSTN

500 k

Ω PU

1.8 M

Ω PD

Device disable/enable.

Low – Device is at reset and in shutdown, and

High - Normal operation.

Recommend 0.1-µF external capacitor to GND to ensure clean

power on reset if not driven. If the pin is driven, it must be held low

until the supply voltage for the device reaches within specifications.

SCL(2)/CD

I/O

When RSTN asserted there is

a 500 k

Ω PD

In I2C mode:

I2C clock pin [I2C address = 0x2C].

Non I2C mode:

After reset: Output CD. Flag indicating that a USB device is attached

(connection detected). Asserted from an unconnected state upon

detection of DP or DM pull-up resistor. De-asserted upon detection

of disconnect.

TUSB216 bảng dữ liệu(PDF) 4 Page - Texas Instruments