Sensor Configuration

The sensitivity and output configuration can be selected via the DIP switches on the side of the sensor. Use the included spanner to

open the screw-off cover on the side of the sensor and access the DIP switches.

Important: Tighten the DIP switch cover a full quarter turn after contact to maintain the watertight seal.

DIP Switch Functions

Switches

Function

A1, A2, A3, A4

Discrete Output switching distance (detects objects from sensor face to this point)

A5, A6, A7

Analog Response Speed

A8

Polarity

B1, B2, B3

Sensitivity (higher sensitivity sees weaker objects and has a larger beam pattern)

B4, B5, B6

Discrete Response Speed

B7

Normally Open/Normally Closed output functionality

B8

Analog Slope

DIP switch 1 is on the left and DIP switch 8 is on the right.

Distance Settings

Zone Distance

A1

A2

A3

A4

Distance

0

0

0

0

4 m (13.1 ft)

0

0

0

1

5 m (16.4 ft)

0

0

1

0

10 m (32.8 ft)

0

0

1

1

15 m (49.2 ft)

0*

1*

0*

0*

20 m (65.6 ft)

0

1

0

1

25 m (82.0 ft)

0

1

1

0

30 m (98.4 ft)

0

1

1

1

35 m (114.8 ft)

1

0

0

0

40 m (131.2 ft)

1

0

0

1

45 m (147.6 ft)

1

0

1

0

50 m (164.0 ft)

1

0

1

1

60 m (196.9 ft)

1

1

0

0

70 m (229.7 ft)

1

1

0

1

80 m (262.5 ft)

1

1

1

0

90 m (295.3 ft)

1

1

1

1

100 m (328.1)

* Default settings

Note: Highest sensitivity is achieved only if the sensing distance is 72 m (236.2 ft) or less.

P/N 199895 Rev. A

www.bannerengineering.com - Tel: +1-763-544-3164

3