Datasheet

Low-cost, 10 to 30 V dc Sensor for use with Plastic Fiber Optics

•

Models available with visible red (660 nm) or visible green (525 nm) LED light

source

•

Sleek, ultra-slim 10 mm housing, mounts to standard 35 mm DIN rail

•

Solid-state, bipolar discrete outputs: one current sourcing (PNP) and one current

sinking (NPN)

•

High-speed models: 200-microsecond output response

•

Standard models: 500-microsecond output response plus crosstalk-avoidance

circuitry (for applications with multiple sensors)

•

Selectable Light/Dark Operate and 40 millisecond pulse stretcher (OFF-delay), via

two easy-to-operate slide switches

•

12-turn Sensitivity adjustment with relative position indicator

•

•

Models available with integral cable or Pico-style quick-disconnect

WARNING: Not To Be Used for Personnel Protection

Never use this device as a sensing device for personnel protection. Doing so could lead to

serious injury or death. This device does not include the self-checking redundant circuitry necessary

to allow its use in personnel safety applications. A sensor failure or malfunction can cause either an

energized or de-energized sensor output condition.

Models

Red Beam

(660 nm)

Green Beam

(525 nm)

Response Time

Output Type

D10AFP

D10AFPG

500 microseconds

4-conductor 2 m (6.5 ft) Cable

Bipolar NPN/PNP Solid-state

D10AFPQ

D10AFPGQ

4-pin Pico-style QD

D10AFPY

D10AFPGY

200 microseconds

4-conductor 2 m (6.5 ft) Cable

D10AFPYQ

D10AFPGYQ

4-pin Pico-style QD

Features

Yellow Signal

Strength LED

LED flashes

to indicate received

signal strength

Green

Power ON

LED

12-Turn Sensitivity (Gain)

Control and Indicator

Turn Sensitivity control

clockwise to increase Gain

LO/DO Select

Switch

Delay Selector

Switch

1 To order the 9 m (30 ft) PVC cable model, add the suffix "W/30" to the cabled model number. For example, D10AFP W/30. Models with a quick disconnect

require a mating cordset.

D10—Discrete Output

Original Document

118431 Rev. B

14 November 2016

118431