- 28 -

heat source, while maintaining a well-ventilated enclosure. To reduce the thermal conductivity sensor

and a copper plating layer of the printed circuit board should be as minimal other portions, and

leaving a gap between them.

4.Light effects

Prolonged exposure to sunlight or strong ultraviolet radiation, will reduce performance.

5.Recovery process

Placed under extreme operating conditions or chemical vapor sensors, through the following

process, you can return it to the state calibration. 2 hours at 45℃ and < 10% RH humidity

conditions(Hong Gan); then at 20-30 ℃ and> 70% RH humidity under conditions remain more

than 5 hours.

6.Wiring Precautions

Affects the communication quality of the signal wire distance and communication quality, we

recommend using a high quality shielded cable.

7.Soldering Information

Manual welding, at a temperature of 300 ℃ maximum contact time must be less than 10

seconds.

8.Product upgrades

For details, please consult our technical department.

10. License Agreement

Without the prior written permission of the copyright holder, shall not in any form or by any

means, whether electronic or mechanical (including photocopying), for any part of this manual may

be reproduced, nor may its contents be communicated to a third party. The contents are subject to

change without notice.

Aosong Electronics Co., Ltd. and the third party has a proprietary software, the user may use

only the signing of a contract or license the software.

11. Warnings and personal injury

Do not use this product as safety or emergency stop devices, as well as due to the failure of the

product could result in personal injuries to any of the other applications. The product shall not apply

unless there is a particular purpose or use authorization. Before installation, handling, use or

maintenance of the product to the reference product data sheets and application notes. Failure to

comply with this recommendation, that may result in death or serious injury, the resulting company

will not be liable for all damages in personal injury and death, and thus exempt from corporate

managers and employees and affiliated agents, distributors providers and any other claims that may

arise, including: a variety of costs, compensation costs, legal fees and so on.

12. Quality assurance

The company provides a period of 12 months (one year) quality assurance (calculated from

the date of shipment from) their direct purchasers of the product. Data sheet of the company

published the technical specifications of the product shall prevail. If the warranty period, the product

is proved to be defective quality, the company will provide free repair or replacement. Users must

satisfy the following conditions:

Aosong Guangzhou Electronics Co., Ltd.

Order Phone: 4006 305378

Enterprise QQ: 4006305378

www.aosong.com