MSM7650 datasheet(12/34 Pages) OKI

12 / 34 page

¡ Semiconductor

MSM7650

12/34

• Black & Blank Pedestal

This block adds sync signals at the luminance side to luminance signals.

• Interpolator +LPF

This block executes data interpolation and the elimination of high frequency components by

LPF for input chrominance signals. Both 4:2:2 and 4:1:1 signals are processed.

•I2C Control Logic

This is the serial interface block based on I2C standard of Phillips Corporation.

Internal registers MR and CR can be set from the master side.

When writing to the internal registers other than MR [5] (black level control) and CR [1:0]

(overlay level), written contents are immediately set to them. It is during the vertical blanking

period that written contents are set to MR [5] and CR [1:0].

• Sync Generator & Timing Controller

This block generates sync signals and control signals.

This block is operated in slave mode, which performs external synchronization, and in master

mode, which internally generates sync signals.

• Color Burst Generator

Outputs U and V components of amplitude of burst signals.

• Subcarrier Generator

Executes color subcarrier generation.

• Interpolation Filter (IPF)

This block performs upsampling at CLK X 2 (double speed CLKX1) for luminance signals and

chrominance signals modulated with CLKX1. Interpolation processing is executed in this

process.

MSM7650 bảng dữ liệu(PDF) 12 Page - OKI electronic componets