RFPIC12C509AF datasheet(77/104 Pages) MICROCHIP

77 / 104 page

Preliminary

DS70031A-page 75

rfPIC12C509AG/509AF

11.0

ELECTRICAL CHARACTERISTICS

Absolute Maximum Ratings†

Ambient Temperature under bias .............................................................................................................. -40°C to +85°C

Storage Temperature .............................................................................................................................. -40°C to +150°C

Absolute Maximum Ratings - PICmicro

Voltage on VDD with respect to VSS .................................................................................................................0 to +7.0 V

Absolute Maximum Ratings - Transmitter

Voltage on VDDRF with respect to VSSRF .....................................................................................................-0.3 to +7.0 V

Voltage on MCLR with respect to VSS...............................................................................................................0 to +14 V

Voltage on all other PICmicro pins with respect to VSS................................................................. -0.3 V to (VDD +0.3 V)

Voltage on all other Transmitter pins with respect to VSSRF ..........................................................-0.3 to (VDDRF +0.3 V)

Max. Current into RFEN pin .........................................................................................................................-1.0to 1.0 mA

Total Power Dissipation(1) .................................................................................................................................... 700 mW

Max. Current out of VSS pin .................................................................................................................................. 200 mA

Max. Current into VDD pin ..................................................................................................................................... 150 mA

Input Clamp Current, IIK (VI <0or VI >VDD) ........................................................................................................ ±20 mA

Output Clamp Current, IOK (VO <0or VO >VDD).................................................................................................. ±20 mA

Max. Output Current sunk by any I/O pin................................................................................................................ 25 mA

Max. Output Current sourced by any I/O pin........................................................................................................... 25 mA

Max. Output Current sourced by I/O port (GPIO).................................................................................................. 100 mA

Max. Output Current sunk by I/O port (GPIO )...................................................................................................... 100 mA

Note 1: Power Dissipation is calculated as follows: PDIS =VDD x{IDD -

∑ IOH}+ ∑ {(VDD-VOH)x IOH}+ ∑(VOL xIOL)

†NOTICE: Stresses above those listed under "Maximum Ratings" may cause permanent damage to the device. This

is a stress rating only and functional operation of the device at those or any other conditions above those indicated

in the operation listings of this specification is not implied. Exposure to maximum rating conditions for extended

periods may affect device reliability.

RFPIC12C509AF bảng dữ liệu(PDF) 77 Page - Microchip Technology

RFPIC12C509AF bảng dữ liệu(HTML) 77 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

bảng dữ liệu tải về

Link URL