| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
MM74HC574WM bảng dữ liệu(PDF) 3 Page - ON Semiconductor |
|
|
|||||||||||||||||||||||||||||
MM74HC574WM bảng dữ liệu(HTML) 3 Page - ON Semiconductor |
|
3 / 8 page ![]() MM74HC574 www.onsemi.com 3 DC ELECTRICAL CHARACTERISTICS (Note 3) Symbol Parameter Conditions VCC TA = 255C TA = −40 to 855C TA = −55 to 1255C Units Typ Guaranteed Limits VIH Minimum HIGH Lev- el Input Voltage 2.0 V 4.5 V 6.0 V 1.5 3.15 4.2 1.5 3.15 4.2 1.5 3.15 4.2 V VIL Maximum LOW Lev- el Input Voltage 2.0 V 4.5 V 6.0 V 0.5 1.35 1.8 0.5 1.35 1.8 0.5 1.35 1.8 V VOH Minimum HIGH Lev- el Output Voltage VIN = VIH or VIL ⎮IOUT⎜ ≤ 20 mA 2.0 V 4.5 V 6.0 V 2.0 4.5 6.0 1.9 4.4 5.9 1.9 4.4 5.9 1.9 4.4 5.9 V VIN = VIH or VIL ⎮IOUT⎜ ≤ 6.0 mA ⎮IOUT⎜ ≤ 7.8 mA 4.5 V 6.0 V 4.2 5.7 3.98 5.48 3.84 5.34 3.7 5.2 V VOL Maximum LOW Lev- el Output Voltage VIN = VIH or VIL ⎮IOUT⎜ ≤ 20 mA 2.0 V 4.5 V 6.0 V 0 0 0 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 V VIN = VIH or VIL ⎮IOUT⎜ ≤ 6.0 mA ⎮IOUT⎜ ≤ 7.8 mA 4.5 V 6.0 V 0.2 0.2 0.26 0.26 0.33 0.33 0.4 0.4 V IIN Maximum Input Cur- rent VIN = VCC or GND 6.0 V ±0.1 ±1.0 ±1.0 mA IOZ Maximum 3−STATE Output Leakage Current VOUT = VCC or GND OC = VIH 6.0 V ±0.5 ±5.0 ±10 mA ICC Maximum Quiescent Supply Current VIN = VCC or GND IOUT = 0 mA 6.0 V 8.0 80 160 mA DICC Quiescent Supply Current per Input Pin VCC = 5.5 V VIN = 2.4 V or 0.4 V (Note 3) OE 1.0 1.5 1.8 2.0 mA CLK 0.6 0.8 1.0 1.1 DATA 0.4 0.5 0.6 0.7 Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 3. For a power supply of 5 V ±10% the worst−case output voltages (VOH, and VOL) occur for HC at 4.5 V. Thus the 4.5 V values should be used when designing with this supply. Worst−case VIH and VIL occur at VCC = 5.5 V and 4.5 V respectively. (The VIH value at 5.5 V is 3.85 V.) The worst−case leakage current (IIN, ICC, and IOZ) occur for CMOS at the higher voltage and so the 6.0 V values should be used. AC ELECTRICAL CHARACTERISTICS (VCC = 5 V, TA = 25°C, tr = tf = 6 ns) Symbol Parameter Conditions Typ Guaranteed Limit Units fMAX Maximum Operating Frequency 60 33 MHz tPHL, tPLH Maximum Propagation Delay, Clock to Q CL = 45 pF 17 27 ns tPZH, tPZL Maximum Output Enable Time RL = 1 kW, CL = 45 pF 19 28 ns tPHZ, tPLZ Maximum Output Disable Time RL = 1 kW, CL = 5 pF 14 25 ns tS Minimum Setup Time, Data to Clock 10 12 ns tH Minimum Hold Time, Clock to Data −3 5 ns tW Minimum Pulse Clock Width 8 15 ns |
|
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |