| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
MM74HC574WM bảng dữ liệu(PDF) 1 Page - ON Semiconductor |
|
|
|||||||||||||||||||||||||||||
MM74HC574WM bảng dữ liệu(HTML) 1 Page - ON Semiconductor |
|
1 / 8 page ![]() © Semiconductor Components Industries, LLC, 1983 November, 2017 − Rev. 2 1 Publication Order Number: MM74HC574/D MM74HC574 3-State Octal D-Type Edge-Triggered Flip-Flop The MM74HC574 high speed octal D−type flip−flops utilize advanced silicon−gate P−well CMOS technology. They possess the high noise immunity and low power consumption of standard CMOS integrated circuits, as well as the ability to drive 15 LS−TTL loads. Due to the large output drive capability and the 3−STATE feature, these devices are ideally suited for interfacing with bus lines in a bus organized system. These devices are positive edge triggered flip−flops. Data at the D inputs, meeting the set−up and hold time requirements, are transferred to the Q outputs on positive going transitions of the CLOCK (CK) input. When a high logic level is applied to the OUTPUT CONTROL (OC) input, all outputs go to a high impedance state, regardless of what signals are present at the other inputs and the state of the storage elements. The 74HC logic family is speed, function, and pinout compatible with the standard 74LS logic family. All inputs are protected from damage due to static discharge by internal diode clamps to VCC and ground. Features • Typical Propagation Delay: 18 ns • Wide Operating Voltage Range: 2 V – 6 V • Low Input Current: 1 mA Maximum • Low Quiescent Current: 80 mA Maximum • Compatible with Bus−oriented Systems • Output Drive Capability: 15 LS−TTL Loads MAXIMUM RATINGS (Note 1) Rating Symbol Value Unit Supply Voltage VCC −0.5 to + 7.0 V V DC Input Voltage VIN −1.5 to VCC + 1.5 V V DC Output Voltage VOUT −0.5 to VCC + 0.5 V V Clamp Diode Current IIK, IOK ±20 mA DC Output Current, per pin IOUT ±35 mA DC VCC or GND Current, per pin ICC ±70 mA Storage Temperature Range TSTG −65 to +150 °C Power Dissipation (Note 2) S.O. Package only PD 600 500 mW Lead Temperature (Soldering 10 s) TL 260 °C Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. 1. Unless otherwise specified all voltages are referenced to ground. 2. Power Dissipation temperature derating — plastic “N” package: − 12 mW/ °C from 65°C to 85°C. www.onsemi.com See detailed ordering and shipping information in the package dimensions section on page 2 of this data sheet. ORDERING INFORMATION TSSOP20 MTC SUFFIX CASE 948AQ SOP20 SJ SUFFIX CASE 565BG PDIP20 N SUFFIX CASE 646AC SOIC20 WM SUFFIX CASE 751BJ |
Số phần tương tự - MM74HC574WM |
|
Mô tả tương tự - MM74HC574WM |
|
|
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |