ZEPIR0BAS02MODG datasheet(35/78 Pages) ZILOG

tên linh kiện	ZEPIR0BAS02MODG

Giải thích chi tiết về linh kiện	ZMOTION짰 Detection Module II

PDF	78 Pages

Scroll/Zoom	100%

nhà sản xuất	ZILOG [Zilog, Inc.]

Trang chủ	http://www.zilog.com

Logo

35 / 78 page

PS030504-0917

Serial Commands

ZMOTION® Detection Module II

Product Specification

Hyper Sense Level Setting

This command defines the Hyper Sense sensitivity level when the mode is enabled via the

'E' command. The purpose of the Hyper Sense Mode is to increase the detectors sensitivity

to more subtle motion events. A value of 0 to 3 is used to set the level. Setting the level to

0 has the same effect as disabling Hyper Sense with the 'E' command (setting it to 'N').

Setting it to any other level can cause the occasional false detection, so this mode should

only be used when the occasional false detection is tolerable.

Read Hyper Sense Level Setting

Command

'g' (0x67)

Description

This command returns the current Hyper Sense level that will be used when the Hyper

Sense Mode is enabled via the 'E' command. 0 is the lowest setting and corresponds to off,

while 3 is the most sensitive setting.

Return Values

0-3 (decimal)

Normal Command Sequence

Host

ZMOTION

Module

“g”

[0-3]

ZEPIR0BAS02MODG bảng dữ liệu(PDF) 35 Page - Zilog, Inc.