TLE6211 datasheet(34/35 Pages) INFINEON

34 / 35 page

TLE 6210

TLE 6211

Revision History

V1.2 Data Sheet

2002-08

Integrated protection functions are designed to prevent IC destruction under fault

conditions described in the data sheet. Fault conditions are considered as “outside”

normal operating range. Protection functions are not designed for continuous repetitive

operation.

Characteristics show the deviation of parameter at the given supply voltage and junction

temperature. Typical values show the typical parameters expected from manufacturing.

V1.0

2002-07 Data sheet

Remove pad / chip information from the datasheet

ESD value SILA, MR, VR,UZP 4kV

Update typ. value 4.3.3

Extend and correct block description at chapters 4.4; 4.6; 4.7; 4.8

Table 1: SILA function at overtemperature changed

Table 2: timings as a function of tCLK

Figure 11, t3: corect timing

Chapter 4.11: Extend description; add figure 12: Detection of

watchdog edges

Appplciation diagram: replace free wheeling zener diodes at MR

and VR relay by normal diodes.

V1.1

2002-07 change device suffixes:

bare dice: TLE621x C

packaged: TLE621x G

V1.2

2002-08 Table 1 and text chapter 4.8: correct NSILA at overvoltage

Change long term drift 4.4.6 to 10000h

Add a more detailed description to figure 12.

Version

Date

Major Changes

TLE6211 bảng dữ liệu(PDF) 34 Page - Infineon Technologies AG