HMC7950LS6 datasheet(14/16 Pages) AD

14 / 16 page

HMC7950

Data Sheet

Rev. A | Page 14 of 16

EVALUATION BOARD

The HMC7950 evaluation board is a 2-layer board fabricated

using Rogers 4350 and using best practices for high frequency

RF design. The RF input and RF output traces have a 50 Ω

characteristic impedance.

The evaluation board and populated components are designed

to operate over the ambient temperature range of −40°C to

+85°C. For the proper bias sequence, see the Applications

Information section.

The evaluation board schematic is shown in Figure 41. A fully

populated and tested evaluation board, shown in Figure 40, is

available from Analog Devices, Inc., upon request.

Figure 40. Evaluation PCB

Table 8. Bill of Materials for Evaluation PCB EV1HMC7950LS6

Item

Description

RFIN, RFOUT

PCB mount, K connector, SRI Part Number 21-146-1000-92

C1, C7

100 pF capacitor, 5%, 50 V, C0G, 0402 package

C3, C8

10 nF capacitor, 10%, 16 V, X7R, 0402 package

C5, C9

4.7 µF tantalum capacitor, 10%, 20 V, 1206 package

Amplifier, HMC7950LS6

PCB

Evaluation PCB; circuit board material: Rogers 4350

VDD, VGG2

DC pins, Molex Part Number 87759-0414

C2, C4, C6, J3, J4, VGG

Do not install (DNI)

HMC7950LS6 bảng dữ liệu(PDF) 14 Page - Analog Devices